We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Optoma BL-FS300B projector lamp module with 300W bulb in housing

OPTOMA

OPTOMA BL-FS300B Projector Lamp 300W 2000 Hrs

SKU CH-0AKP-SPDTJ

A new 300 W replacement lamp module with 2,000-hour life for easy installation in Optoma projectors

  • TypeProjector Lamp
  • Wattage300W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module with 300W Philips UHP bulb
  • 2,000-hour rated lamp life for extended use
  • Manufactured to ISO9001 quality standards
  • Genuine OEM components from Philips or Osram
  • Fully assembled housing ensures easy replacement

Direct replacement module

The Optoma BL-FS300B is a complete lamp-and-housing assembly built around a 300 W Philips UHP bulb. It arrives fully assembled so the projector can be back in service after a single swap.

Restores original brightness

Install this unit when the existing lamp reaches its 2,000-hour rating or when image output has dimmed noticeably. The change is worthwhile once colour fidelity drops or the projector warns that lamp life is exhausted.

Fits approved projectors

The module matches the factory mounting points and electrical interface of the models it was designed for, requiring no adapter or firmware update. It frees the owner from sourcing a bare bulb and aligning it manually.

Highlights

  • Ready-to-install module with 300W Philips UHP bulb
  • 2,000-hour rated lamp life for extended use
  • Manufactured to ISO9001 quality standards
  • Genuine OEM components from Philips or Osram
  • Fully assembled housing ensures easy replacement

Specifications

TypeProjector Lamp
Wattage300W
Lamp Life2,000 Hrs.

Questions about this item

Does the BL-FS300B lamp module arrive fully assembled with housing so it fits my Optoma projector without extra parts?

Yes, the lamp is supplied as a complete module with the 300 W Philips UHP bulb already mounted in its housing, so it installs directly into compatible Optoma projectors.

What is the correct sequence for installing the lamp, and which step do users most often miss?

Power off and unplug the projector, allow it to cool completely, remove the lamp cover, release the retaining screws, slide out the old module, insert the new BL-FS300B module until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp-hour counter in the menu — the counter reset is the step most often forgotten.

When should I plan to replace the lamp again based on its rated life?

The lamp is rated for 2 000 hours of operation; after that period brightness and colour accuracy will decline, so a replacement module should be sourced once the projector's hour counter approaches that figure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.