OPTOMA
OPTOMA 5811116519-S projector lamp 280W
A ready-to-install 280 W replacement lamp module rated for 3,000 hours normal or 4,000 hours economy use
- TypeProjector Lamp
- Wattage280W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Genuine compatible replacement with 280W P-VIP bulb and housing
- Up to 4000 hours lamp life in economy mode
- Ready-to-install module for Optoma projectors
- Manufactured to ISO9001 quality standards
- 3000 hours normal mode runtime for extended use
Genuine Replacement Lamp Module
The Optoma 5811116519-S is a new projector lamp module supplied with a P-VIP 280W bulb pre-fitted in its housing. It is designed for owners of compatible Optoma projectors who need a direct replacement without separate bulb handling. Buyers who require a bare bulb only or a lamp for a different brand will not find a match here.
Rated Output and Service Life
The lamp runs at 280W and delivers 3000 hours in normal mode or 4000 hours in economy mode. Each unit is tested to ISO 9001 standards for ignition, voltage, beam performance and run-time before shipment. No cooling, noise or power-draw figures beyond the rated wattage are provided.
Assembled Housing and Quality Assurance
The pre-assembled housing allows immediate installation without aligning a bare bulb. Every version offered — OEM direct, Optoma-branded, alternate OEM or compatible — undergoes the same quality checks for appearance, connections and reliability. No additional software, cables or mounting hardware are included.
Highlights
- Genuine compatible replacement with 280W P-VIP bulb and housing
- Up to 4000 hours lamp life in economy mode
- Ready-to-install module for Optoma projectors
- Manufactured to ISO9001 quality standards
- 3000 hours normal mode runtime for extended use
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 280W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
How do I install the Optoma 5811116519-S lamp module and what step is often missed?
Power off and unplug the projector, let it cool completely, remove the lamp cover, loosen the retaining screws, slide out the old module, insert the new 280W P-VIP assembly until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp hour counter in the menu — skipping the reset is the step most people forget.
What maintenance or replacement will the 280W P-VIP lamp need later?
The lamp itself is the only replaceable consumable; after 3,000 hours in normal mode or 4,000 hours in economy mode the brightness drops to roughly half and the module must be swapped for a new 5811116519-S unit.
What limit appears first during sustained use of this 280W lamp?
Rated lamp life is reached first — 3,000 hours at normal power or 4,000 hours at economy power — after which light output falls below usable levels and the module requires replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



