We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal network switch with ten front ports and status LEDs

Optical Network Video Technologies

Optical Network Video Technologies ONV-POE31108PFB-at 10-port PoE network switch

SKU CH-N4W3-PJ4G7 MPN ONV-POE31108PFB-at

10-port PoE switch with eight 30 W ports and two gigabit combo uplinks

  • PowerDC52V/4.8A 250W
  • Package Contents1
  • Class10/100
  • VersionNew
  • Primary Port8 Port
  • Powers eight devices with up to 30 W per PoE port
  • Two gigabit combo ports give flexible fibre or copper uplinks
  • 6 Gbps non-blocking bandwidth keeps traffic flowing
  • 16 K address table handles growing networks
  • Operates reliably from -20 °C to 55 °C

10-port PoE switch for IP camera deployments

This switch provides eight 10/100 Mbps PoE ports and two gigabit combo TP/SFP uplinks. It delivers up to 30 W per PoE port under the IEEE 802.3af/at standard with a total power budget of 250 W. The 5.6 Gbps non-blocking bandwidth and 16K address table support typical surveillance networks. Operating temperatures range from -20 °C to 55 °C.

Suited for small surveillance installs.

Installers powering IP cameras, VoIP phones or wireless access points over Cat5 cable up to 100 metres will find the port count and power budget adequate. Buyers who need faster than 100 Mbps on the powered device ports, or who require Layer 3 routing features, should look at a different model. The fanless design and wide temperature range suit wall-mounted cabinets in unconditioned spaces.

30 W per PoE port decides the camera choice

Each of the eight PoE ports supplies a maximum of 30 W, so the switch can run eight IEEE 802.3at class 4 devices simultaneously within the 250 W budget. If your cameras or access points draw more than 30 W each, this unit cannot power them. The two gigabit combo ports accept either RJ45 or SFP modules for uplink flexibility.

Highlights

  • Powers eight devices with up to 30 W per PoE port
  • Two gigabit combo ports give flexible fibre or copper uplinks
  • 6 Gbps non-blocking bandwidth keeps traffic flowing
  • 16 K address table handles growing networks
  • Operates reliably from -20 °C to 55 °C

Specifications

BrandOptical Network Video Technologies
ModelONV-POE31108PFB-at
PowerDC52V/4.8A 250W
Package Contents1
Class10/100
VersionNew
Primary Port8 Port

Questions about this item

What power source does the ONV-POE31108PFB-at need to operate?

It requires an AC 100-240V 50/60Hz mains supply; the internal unit converts this to DC 52V at 4.8A for the 250W PoE budget.

Can the two Gigabit combo ports link to an older 10/100 switch without speed mismatch?

Yes, the combo ports auto-negotiate and support MDI/MDIX, so they will fall back to 100 Mbps full-duplex when connected to legacy 10/100 equipment.

Which LEDs confirm that a connected IP camera is receiving PoE power?

Each of the eight PoE ports has a dedicated PoE status LED that lights when the switch is delivering up to 30W to a powered device.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.