We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal box with six RJ45 ports and power socket

Optical Network Video Technologies

Optical Network Video Technologies ONV-POE31064P-at 6-Port 10/100M PoE Switch 4 PoE Ports 110W

SKU CH-C1V8-XJH16

Six-port 10/100 Mbps switch delivers up to 30 W per PoE port across four ports with a 110 W total budget

  • StandardsIEEE 802.3/3u, IEEE 802.3af/at
  • Package Contents1
  • Class10/100M
  • VersionNew
  • Powers four devices through single cables using IEEE 802.3af/at PoE
  • Each PoE port delivers up to 30 watts for cameras or access points
  • 110 watt total budget supports multiple powered devices simultaneously
  • Two extra uplink ports expand the network without using PoE capacity
  • Plug-and-play operation requires no software setup or configuration

Six-Port PoE Switch for Small Networks

The Optical Network Video Technologies ONV-POE31064P-at delivers six 10/100 Mbps RJ45 ports, four of which supply IEEE 802.3af/at power over Ethernet. Total PoE budget reaches 110 W with a per-port ceiling of 30 W. It targets installers powering wireless access points and IP cameras in a single cabinet.

Suits Four-PoE-Device Builds.

This unit fits deployments that need exactly four powered ports and two uplinks at Fast Ethernet speeds. Buyers requiring more than four PoE connections, gigabit uplink bandwidth, or a larger aggregate power budget should consider a different switch class.

110 W Total PoE Budget Decides Device Count

The 110 W limit determines how many 30 W class devices can run together. Four maximum-draw endpoints would exceed the budget, so the practical device count depends on each camera or access point's actual consumption.

Highlights

  • Powers four devices through single cables using IEEE 802.3af/at PoE
  • Each PoE port delivers up to 30 watts for cameras or access points
  • 110 watt total budget supports multiple powered devices simultaneously
  • Two extra uplink ports expand the network without using PoE capacity
  • Plug-and-play operation requires no software setup or configuration

Specifications

BrandOptical Network Video Technologies
ModelONV-POE31064P-at
StandardsIEEE 802.3/3u, IEEE 802.3af/at
Package Contents1
Class10/100M
VersionNew

Questions about this item

Will the 10/100M uplink ports handle traffic from my older 10 Mbps cameras without slowing the 100 Mbps PoE ports?

Yes, each RJ45 port auto-negotiates 10 or 100 Mbps independently, so legacy 10 Mbps devices on the uplinks will not throttle the four PoE ports running at 100 Mbps.

Which LED pattern confirms that ports 3 to 6 are delivering up to 30 W per port under the 110 W total budget?

When a powered device is detected, the corresponding PoE LED lights solid; the switch then allocates up to 30 W per port while keeping the combined draw within the 110 W limit.

Does the package include mounting brackets or a rack kit, or must I buy them separately?

The box contains only the switch and its power cord; mounting brackets or a rack-mount kit are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.