We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal rack-mount network switch with 24 front RJ45 ports and two combo uplink ports

Optical Network Video Technologies

Optical Network Video Technologies ONV-POE31024PFA 24-port PoE network switch

SKU CH-9VWE-E7DPA MPN ONV-POE31024PFA

A 24-port PoE switch delivering up to 30 W per port with two gigabit combo uplinks and 14.8 Gbps non-blocking bandwidth

  • PowerAC100-240V 5A
  • Package Contents1
  • Class10/100
  • VersionNew
  • 24 PoE ports power cameras and access points without extra cables
  • 8 Gbps non-blocking bandwidth keeps traffic flowing at wire speed
  • 16K MAC address table scales for growing networks
  • Dual gigabit combo uplinks link switches or servers at 1000 Mbps
  • IEEE 802.3af/at compliant PoE delivers up to 30 W per port

PoE switch for IP camera deployments

The Optical Network Video Technologies ONV-POE31024PFA provides 24 Fast Ethernet ports that all deliver IEEE 802.3af/at power up to 30 watts each. Two gigabit combo uplinks handle aggregate traffic with a 14.8 Gbps non-blocking fabric. A 16 K address table and store-and-forward switching keep latency below 20 microseconds. The unit operates from -20 °C to 55 °C with an AC 100-240 V supply.

Suited for single-switch surveillance installs

Installers running up to 24 PoE cameras or access points from one rack-mount appliance will find the port count and power budget convenient. Sites that need 10 Gbps uplinks, Layer 3 routing, or PoE budgets above 30 watts per port should evaluate other hardware. Environments requiring fanless silence or extended temperature ranges beyond the listed limits also fall outside this design.

24 PoE ports at 30 watts maximum each

The per-port ceiling of 30 watts under IEEE 802.3af/at is the single figure that determines whether the switch can power a given camera, phone, or wireless access point. Verify each endpoint’s draw against that limit before specifying the ONV-POE31024PFA for a project.

Highlights

  • 24 PoE ports power cameras and access points without extra cables
  • 8 Gbps non-blocking bandwidth keeps traffic flowing at wire speed
  • 16K MAC address table scales for growing networks
  • Dual gigabit combo uplinks link switches or servers at 1000 Mbps
  • IEEE 802.3af/at compliant PoE delivers up to 30 W per port

Specifications

BrandOptical Network Video Technologies
ModelS-ONV-POE31024PFA
PowerAC100-240V 5A
Package Contents1
Class10/100
VersionNew

Questions about this item

What comes in the box with the ONV-POE31024PFA and do I need to buy SFP modules for the uplink ports?

The package contains the 24-port PoE switch and a power cord. The two combo uplink ports accept either RJ45 copper or SFP fibre modules; SFP modules are not included and must be purchased separately if you plan to use fibre links.

Should I choose this 10/100 PoE model or a Gigabit PoE switch for my cameras?

This switch provides 24 ports at 10/100 Mbps with up to 30 W per port (IEEE 802.3af/at) and two 10/100/1000M combo uplinks. Choose it when camera feeds are 100 Mbps or lower; select a full Gigabit PoE switch if any device needs 1 Gbps at the edge.

What does the 14.8 Gbps non-blocking bandwidth mean once the switch is installed?

The 14.8 Gbps figure is the total switching capacity. It allows all 24 PoE ports at 100 Mbps and both uplinks at 1 Gbps to run simultaneously without congestion, giving wire-speed forwarding for typical IP camera and access-point deployments.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.