We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal network switch with four RJ45 ports and one SC fiber port

Optical Network Video Technologies

Optical Network Video Technologies ONV-POE31004PF-at 4 PoE 5-Port SC Fiber Switch

SKU CH-DTN5-QWAC1

Delivers power and data over four 10/100 Mbps PoE ports plus a 155 Mbps SC fibre uplink

  • Power30W
  • Package Contents1
  • Class10/100M
  • VersionNew
  • Primary Port5 Port
  • Powers cameras and APs over Cat-5 cable with 30 W per PoE port
  • Four RJ45 ports auto-negotiate 10/100 Mbps speed and duplex via Auto Uplink
  • SC fibre uplink runs at 155 Mbps for extended reach
  • 3 at compliance protects non-PoE gear and stops power on disconnect
  • 120 W total PoE budget supports multiple devices simultaneously

PoE Switch with Fiber Uplink

The ONV-POE31004PF-at delivers power and data over a single Cat-5 cable to four IEEE 802.3 at devices. Each RJ45 port supplies up to 30 W while the total PoE budget reaches 120 W. An SC fiber port provides a 155 Mbps uplink for extended network reach. Auto-sensing logic powers only compliant endpoints and stops power when devices are disconnected.

Sustained Load Behaviour

The 1K-entry MAC address table auto-learns and ages entries to maintain forwarding efficiency during continuous traffic. IEEE 802.3 x flow control manages full-duplex congestion and backpressure handles half-duplex pressure without frame loss. The 10/100 Mbps copper ports and 155 Mbps fiber uplink operate at wire speed under constant PoE draw.

Upgrade Path and Fit

This unit replaces separate media converters and midspan injectors in IP camera or wireless access-point deployments. The jump is worthwhile when a single compact switch must provide both fiber backhaul and 30 W per port to four endpoints. It does not suit installations requiring gigabit copper speeds or more than four powered devices.

Highlights

  • Powers cameras and APs over Cat-5 cable with 30 W per PoE port
  • Four RJ45 ports auto-negotiate 10/100 Mbps speed and duplex via Auto Uplink
  • SC fibre uplink runs at 155 Mbps for extended reach
  • 3 at compliance protects non-PoE gear and stops power on disconnect
  • 120 W total PoE budget supports multiple devices simultaneously

Specifications

BrandOptical Network Video Technologies
ModelONV-POE31004PF-at
Power30W
Package Contents1
Class10/100M
VersionNew
Primary Port5 Port

Questions about this item

How much heat does the 120 W total PoE budget generate when all four ports run at 30 W continuously?

The switch delivers up to 120 W across its four PoE ports with each port capped at 30 W; sustained full-load heat output will depend on your cabinet ventilation.

Which cables and powered devices must I already have to use the four PoE ports?

You need Cat-5 or better Ethernet cables and IEEE 802.3 at compliant devices such as wireless access points or surveillance cameras.

Will the 155 Mbps SC fiber uplink work with my existing 10/100 Mbps copper network?

Yes, the SC fiber port runs at 155 Mbps while the four RJ45 ports operate at 10/100 Mbps, so the uplink can aggregate traffic from the copper links.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.