We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver metal network switch with six RJ45 ports on the front panel

Optical Network Video Technologies

Optical Network Video Technologies ONV-H1064PL 6-port 10/100M PoE network switch 4×30W 60W total

SKU CH-B878-CKT0E MPN ONV-H1064PL

A 6-port 10/100M switch with four PoE ports delivering up to 30W each and a 60W total budget

  • Package Contents1
  • VersionNew
  • Powers four devices up to 30 W each
  • 60 W total budget runs multiple cameras
  • 250 m reach at 10 Mbps for long runs
  • 6 Gbps switching capacity handles traffic
  • 100 000-hour MTBF for reliable operation

6-port 10/100M PoE switch for IP cameras

The ONV-H1064PL provides six RJ45 ports operating at 10 or 100 Mbps. Ports one to four deliver IEEE802.3af/at power up to 30 W each, with a 60 W total budget. Port isolation on the PoE ports separates connected devices. The unit runs from AC 100-240 V and works at -20 °C to 55 °C.

100 m standard limit and 250 m long-reach mode

At 100 Mbps the copper link reaches 100 m over Cat5 or better. Dropping to 10 Mbps extends the distance to 250 m for long cable runs. Store-and-forward switching with a 1 M buffer and 1.6 G bandwidth handles the traffic. Maximum latency stays below 20 microseconds.

Check PoE budget and port count before ordering

Four PoE ports share the 60 W pool, so each device must fit within the per-port 30 W cap and the combined total. The switch offers only 10/100 Mbps speeds; gigabit uplinks are not available. Verify that your powered devices accept IEEE802.3af or at and that the 1K MAC table meets your network size.

Highlights

  • Powers four devices up to 30 W each
  • 60 W total budget runs multiple cameras
  • 250 m reach at 10 Mbps for long runs
  • 6 Gbps switching capacity handles traffic
  • 100 000-hour MTBF for reliable operation

Specifications

BrandOptical Network Video Technologies
ModelONV-H1064PL
Package Contents1
VersionNew

Questions about this item

Should I pick the four PoE ports or the two uplink ports for my cameras?

Use ports one to four for powered devices such as IP cameras because each delivers up to 30 W and the total budget is 60 W; ports five and six are non-PoE uplinks for the network backbone.

What does the 1.6 G bandwidth figure mean when the switch is handling traffic?

It is the aggregate switching capacity, so the fabric can forward up to 1.6 Gbps combined across all six ports without blocking.

How far can I run a cable on a PoE port at 10 Mbps versus 100 Mbps?

At 10 Mbps the PoE ports reach 250 metres; at 100 Mbps the distance drops to 100 metres over Cat5 or better UTP.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.