We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Onsrud 60-169MW carbide compression router bit with spiral flutes

Onsrud

Onsrud 60-169MW compression router bit hand tool

SKU CH-8HFE-V4T2C MPN 60-169MW

Solid carbide compression router bit cuts laminated wood and MDF cleanly

  • TypeAngle, Pitch & Slope Locators
  • MaterialCarbide
  • Carbide construction resists wear for long tool life
  • Compression spiral design cuts clean edges on laminated wood and MDF
  • 1/2 inch cutter diameter handles substantial material removal
  • Onsrud precision manufacturing ensures accurate routing results
  • Solid router bit built for demanding hand tool applications

Application & User

This Onsrud compression router bit is built for CNC operators and woodworkers who cut laminated wood and MDF. The solid carbide construction resists wear during high-volume routing. It is not suited for metalworking or for buyers who need a bit for non-laminated solid timber.

Critical Specification

The compression spiral geometry is the defining feature. It pushes chips upward on the top flutes and downward on the bottom flutes to prevent tear-out on both faces of the panel. Without this geometry, laminated surfaces will chip.

Thermals, Noise & Power

Carbide dissipates heat efficiently during continuous cuts, keeping the tool tip stable. The bit runs quietly in a properly balanced spindle. Power draw depends entirely on the machine motor and feed rate selected by the operator.

Highlights

  • Carbide construction resists wear for long tool life
  • Compression spiral design cuts clean edges on laminated wood and MDF
  • 1/2 inch cutter diameter handles substantial material removal
  • Onsrud precision manufacturing ensures accurate routing results
  • Solid router bit built for demanding hand tool applications

Specifications

BrandOnsrud
Model60-169MW
TypeAngle, Pitch & Slope Locators
MaterialCarbide

Questions about this item

What does the 1/2 in cutter diameter mean once the bit is in a real machine?

It sets the exact width of cut, so every pass removes a half-inch swath through laminated wood or MDF without needing multiple overlapping cuts.

What shank standard does this bit use and what does it cap in practice?

The bit fits a standard half-inch collet, limiting maximum tool length and vibration to what that collet can securely clamp.

What physical clearance does the 1 1/8 in cutting length need to fit or mount?

The router must provide at least 1 1/8 in of usable spindle travel and a collet deep enough to grip the shank while the flutes reach full depth.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.