We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White steel ceiling projector mount with adjustable arm and swivel bracket

ONKRON

ONKRON K3A-W White Ceiling Projector Mount 22 lbs

SKU CH-WCQV-X4QR4

Ceiling projector mount holds up to 22 lbs with 15° swivel, 30° tilt and 11.4" to 15.3" height adjustment

  • TypeCeiling mount
  • Cabinet ColorWhite
  • Supports projectors up to 22 lbs with sturdy steel construction
  • Swivels 15° left or right for flexible viewing angles
  • Tilts 30° to eliminate keystone distortion
  • Height adjusts from 11.4" to 15.3" for optimal placement
  • Mounts to ceiling or wall with 9.5" to 13.4" hole pattern

Universal Ceiling Projector Mount 22 lbs

The ONKRON K3A-W is a white ceiling mount designed for projectors weighing up to 22 lbs. It suits home cinema rooms, classrooms and conference halls where a fixed overhead installation is required. The mount also works as a wall bracket, giving installers flexibility for different room layouts. Buyers needing support for heavier projectors or motorised lens shift will need a different solution.

Adjustable Tilt Swivel and Height

The mount provides 15° of swivel to either side and 30° of tilt for precise image alignment. Height can be set between 11.4" and 15.3" from the ceiling surface to the projector base. High-quality steel construction and a white powder-coated finish keep the assembly rigid and quiet during normal operation. No active cooling or power draw is involved.

Steel Construction and Mounting Pattern

The ceiling base measures 4" x 5.1" and the projector plate accepts hole patterns from 9.5" x 9.5" up to 13.4" x 13.4". A universal hole layout and included hardware allow quick installation on wood or concrete ceilings. Installers must verify their projector's mounting holes fall within the stated range before purchase.

Highlights

  • Supports projectors up to 22 lbs with sturdy steel construction
  • Swivels 15° left or right for flexible viewing angles
  • Tilts 30° to eliminate keystone distortion
  • Height adjusts from 11.4" to 15.3" for optimal placement
  • Mounts to ceiling or wall with 9.5" to 13.4" hole pattern

Specifications

TypeCeiling mount
Cabinet ColorWhite

Questions about this item

How do I attach the ceiling base, and what is the common alignment mistake?

The ceiling base measures 4" x 5.1". Mark the centre point of the projector first, then drill the base holes so the column lines up with that centre; drilling the base centred on the room instead of the projector is the frequent error.

Which parts may need tightening or replacement after months of vibration?

The swivel and tilt joints allow 15° side-to-side and 30° tilt movement. Vibration can loosen the locking bolts on those joints; check and re-torque them every few months, and replace any bolt that strips.

At what projector weight does the mount reach its rated limit?

The mount is rated for projectors up to 22 lbs. Exceeding that weight is the first limit reached under sustained use and can cause the column or base to deform.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.