ONIKUMA GAMING YU7 USB/XLR Dynamic Microphone with RGB Boom Arm
A USB and XLR dynamic microphone kit with RGB boom arm, touch mute, headphone monitoring, and one-click noise reduction for streaming and recording
- ConnectorXLR
- FeaturesNoise Reduction
- Balanced audio from 50Hz–16KHz frequency response
- Dual USB/XLR connectivity for flexible setups
- Instant touch mute and real-time headphone monitoring
- 95% plosive reduction with foam windshield and pop filter
- RGB boom arm included for adjustable positioning
Dual-Mode USB/XLR Microphone Kit
The ONIKUMA YU7 is a dynamic microphone that works over USB for plug-and-play streaming or over XLR for interface-grade recording. It includes an RGB boom arm, touch mute and gain control so creators can start broadcasting on PC or PlayStation without extra hardware.
Practical Limits of USB and XLR Paths
In USB mode the microphone draws power and enables the 3.5 mm monitor jack, touch mute and gain knob; these controls are disabled when the XLR output is used. The XLR connection requires a separate cable and an external interface or mixer, adding cost and complexity for users who only need simple desktop recording.
Check Your Setup Before Ordering
Verify you have a free USB port for plug-and-play use or an audio interface with phantom power if you plan to run the XLR output. The boom arm clamps to desks up to a standard thickness, so confirm your mounting surface can accept a C-clamp. Buyers who need wireless operation or a stand-alone battery-powered mic should look elsewhere.
Highlights
- Balanced audio from 50Hz–16KHz frequency response
- Dual USB/XLR connectivity for flexible setups
- Instant touch mute and real-time headphone monitoring
- 95% plosive reduction with foam windshield and pop filter
- RGB boom arm included for adjustable positioning
Specifications
| Brand | ONIKUMA GAMING |
|---|---|
| Part Number | YU7 |
| Connector | XLR |
| Features | Noise Reduction |
Questions about this item
Should I use the USB or XLR connection on the ONIKUMA YU7?
USB mode enables plug-and-play use with touch mute, headphone monitoring and gain control; XLR mode requires an audio interface and separate XLR cable for interference-free output.
What does the 50Hz–16KHz frequency response mean for my recordings?
The range captures the full vocal spectrum with balanced lows and crisp highs, so speech and vocals sound natural without exaggerated bass or treble.
Does the XLR output work without an audio interface?
No, the XLR connector must be paired with an interface or mixer via a separate XLR cable; it does not connect directly to a PC or console.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



