OneOdio Pro-10 Wired Over-Ear Headphones Black 50mm 32ohm 110dB 3.5mm 6.35mm
Wired over-ear headphones with 50 mm drivers, 32 ohm impedance and 110 dB sensitivity for DJ monitoring and studio use
- TypeOver the Ear
- ColorBlack
- Driver Unit50 millimeters
- Frequency Response5Hz-40KHz
- THDOver Ear
- Input Impedance32 ohms
- Powerful bass and clear detail from 50 mm drivers
- Comfortable long sessions with padded cushions and adjustable headband
- Single-ear monitoring via 90° swivelling ear cups
- Wide device compatibility with 3.5 mm and 6.35 mm plugs
- Share audio instantly using the built-in shared port
Pro-10 wired DJ headphones
The OneOdio Pro-10 are closed-back, over-ear headphones built for wired monitoring. Large 50 mm neodymium drivers deliver a 20 Hz–40 kHz frequency response at 32 ohms impedance and 110 dB sensitivity. Two detachable cables are included: a 1.2 m 3.5 mm cable with inline microphone and a 2–3 m coiled cable terminating in both 3.5 mm and 6.35 mm plugs.
Musicians and DJs needing single-ear monitoring
Swivelling ear cups rotate 90° for one-ear cueing while the self-adjusting headband and padded cushions maintain comfort during long sessions. The share-audio port lets a second pair plug in directly without splitters. Buyers who require wireless freedom, active noise cancellation or a lighter travel headset should consider other designs.
Two cables and a share port replace adapters
The short straight cable handles mobile calls and portable devices, while the long coiled cable reaches mixers and audio interfaces with either jack size. The built-in share port turns the headphones into a simple splitter so a collaborator can listen simultaneously. No software, batteries or drivers are required.
Highlights
- Powerful bass and clear detail from 50 mm drivers
- Comfortable long sessions with padded cushions and adjustable headband
- Single-ear monitoring via 90° swivelling ear cups
- Wide device compatibility with 3.5 mm and 6.35 mm plugs
- Share audio instantly using the built-in shared port
Specifications
| Brand | OneOdio |
|---|---|
| Series | 1 |
| Model | Pro-10, Pro, 709466429447 |
| Part Number | 709466429447 |
| Type | Over the Ear |
| Color | Black |
| Driver Unit | 50 millimeters |
| Frequency Response | 5Hz-40KHz |
| THD | Over Ear |
| Input Impedance | 32 ohms |
| Signal to Noise Ratio(SNR) | 110 decibels |
| Power Supply | false |
| Sensitivity | 110 decibels |
| Connector | 3.5mm |
| Ear Coupling | over_ear |
| Cord Length | User Manual |
| Weight | 0.66 pounds |
| Noise Cancelling | sound_isolation |
| Wireless Type | IR |
| Microphone Impedance | ~3K ohm |
| Microphone Frequency Response | 40Hz-20KHz |
| Microphone Signal to Noise Ratio(SNR) | 110 decibels |
| Microphone Sensitivity | 110 decibels |
| Compatibility | pc_card |
| Features | sound_isolation, Detachable, Media Control, push_button, Wired, Over Ear, dynamic_driver, 32 ohm, OneOdio DJ Headphones |
| Windows Vista | pc_card |
| Package Contents | OneOdio DJ Headphones, Cable, User Manual, Protective Case |
Questions about this item
What device connection do I need for the 3.5 mm or 6.35 mm plugs on the Pro-10?
Any source with a 3.5 mm or 6.35 mm stereo jack — phone, laptop, audio interface, DJ mixer or amplifier — will drive the 32-ohm, 110 dB headphones without extra power.
Will the 50 mm drivers and 20 Hz–40 kHz response work properly if I keep using an older 3.5 mm-only laptop jack?
Yes, the 3.5 mm cable plugs straight into a legacy jack and the 32-ohm load is easy for standard outputs to drive to full volume.
How can I confirm the Pro-10 is performing as specified after I plug it in?
Play a bass-heavy track — the 50 mm neodymium drivers should deliver powerful low end — and verify the coiled cable extends to 9.8 ft and the share port passes audio to a second pair.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



