We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic shock mount clip with elastic suspension bands and brass threaded insert

On-Stage

On-Stage MY320 20 mm Condenser Shock Mount Clip

SKU CH-0Z46-DA3CR

Holds 20 mm condenser microphones with a 5/8″-27 brass insert to isolate them from vibration and handling noise

  • Minimises unwanted vibrations for cleaner recordings thanks to advanced shock absorption
  • Fits a wide range of condenser microphones via 5/8"-27 female threaded brass insert
  • Built from high-quality rubber, plastic and brass for long-lasting reliability
  • Provides a stable platform that prevents slippage during critical sessions
  • 20 mm opening accommodates most small-diaphragm condenser microphones

Secure fit for small-diaphragm mics

The On-Stage MY320 is a 20 mm condenser shock mount clip built to hold small-diaphragm microphones firmly in place. A 5/8"-27 female threaded brass insert connects the clip to standard microphone stands. Rubber, plastic and brass construction provides a stable platform that resists slippage during recording or performance. The clip isolates the capsule from low-end rumble and floor vibrations for cleaner audio capture.

Suited for studios and live stages needing basic

Engineers who want a lightweight, affordable way to decouple a small-diaphragm condenser from stand-borne vibration will find this clip effective. It is not for users who require elastic-suspension cradles for large-diaphragm models or heavy tube microphones. Builders needing integrated pop filtering or adjustable-angle mounting should look at other designs. The fixed 20 mm diameter also rules out mics with larger body profiles.

20 mm opening determines microphone compatibility

The single specification that decides fit is the 20 mm internal diameter of the mounting ring. Measure the microphone body at the clamping point; if it exceeds 20 mm the clip will not close securely. The 5/8"-27 brass insert is the only stand interface provided, so the clip mounts directly to any stand with that thread. No adapters or additional hardware are included in the package.

Highlights

  • Minimises unwanted vibrations for cleaner recordings thanks to advanced shock absorption
  • Fits a wide range of condenser microphones via 5/8"-27 female threaded brass insert
  • Built from high-quality rubber, plastic and brass for long-lasting reliability
  • Provides a stable platform that prevents slippage during critical sessions
  • 20 mm opening accommodates most small-diaphragm condenser microphones

Specifications

No published specifications for this item yet.

Questions about this item

What thread size must my microphone stand have to accept the 5/8"-27 brass insert on the MY320?

The mount uses a standard 5/8"-27 female thread, so your stand needs a matching 5/8"-27 male thread, which is the common industry size for microphone stands.

Will the 20 mm opening hold the small-diaphragm condenser microphone I already own?

The 20 mm opening is tailored for most small-diaphragm condensers; if your mic body measures approximately 20 mm in diameter, it will fit securely inside the clip.

How can I confirm the MY320 is isolating vibrations after I mount it?

Tap the stand lightly while recording; if the shock mount works, the microphone signal will stay clean without picking up the low-end rumble or handling noise from the stand.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.