OIAGLH
OIAGLH 48V 1.35A 65W 5.5x1.7mm S-Video Cable
Delivers 48 V at 1.35 A through a 5.5 × 1.7 mm barrel plug for NVR and PoE equipment
- Delivers 65 W for stable recorder operation
- 48 V 1.35 A output matches NVR power needs
- 5 mm by 1.7 mm barrel fits CWT KPL-065S-II units
- New condition ensures reliable long-term performance
OIAGLH 48V 65W S-Video Power Adapter
This adapter supplies 48V at 1.35A for a total of 65W to compatible video recorders and NVR systems. It uses a 5.5 x 1.7 mm barrel connector and is built to the CWT KPL-065S-II specification. The unit is new and intended as a direct AC power source for POE equipment.
Replaces a lost or damaged NVR power supply
Use this adapter when the original charger for a 48V video recorder or POE device is missing or has failed. It matches the voltage, current and connector size required by the CWT KPL-065S-II design. The jump is worth it only if the target device specifies exactly 48V, 1.35A and a 5.5 mm by 1.7 mm barrel input. Buyers needing a different voltage, current rating or connector type cannot use this unit.
Highlights
- Delivers 65 W for stable recorder operation
- 48 V 1.35 A output matches NVR power needs
- 5 mm by 1.7 mm barrel fits CWT KPL-065S-II units
- New condition ensures reliable long-term performance
Specifications
No published specifications for this item yet.
Questions about this item
What size barrel connector does this 48V 65W adapter use?
The adapter has a 5.5 mm outer diameter and 1.7 mm inner diameter barrel connector.
How do you connect this CWT KPL-065S-II supply to a video recorder NVR?
Plug the barrel connector into the NVR power input and connect the IEC mains lead to a wall socket; the step often missed is verifying the recorder requires 48 V at 1.35 A before powering on.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
More in S-Video Cables
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
