We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black power adapter with 5.5 by 2.5 mm barrel connector

OIAGLH

OIAGLH 12V 5A 60W 5.5x2.5mm S-Video Cable

SKU CH-A7XJ-C52GH

12 V 5 A power adapter with 5.5 × 2.5 mm barrel plug for LCD monitors

  • Delivers 60 W output for stable monitor operation
  • 12 V 5 A rating matches original adapter specifications
  • 5 mm by 2.5 mm barrel connector fits compatible LCD displays
  • New condition ensures reliable performance from first use

12V 5A 60W Power Adapter for LCD Monitors

This 12V 5A 60W AC adapter supplies power to compatible LCD monitors using a 5.5 x 2.5 mm barrel connector. It is intended as a replacement or spare charger for displays that require this exact voltage and current rating. The unit carries the CWT KPL-060F and KPL-060F-VI model designations for identification.

Simple Barrel Plug Installation and Polarity Checks

Installation requires aligning the 5.5 mm outer diameter and 2.5 mm inner pin with the monitor's DC input jack and pushing firmly until seated. Problems usually arise when the centre-positive polarity does not match the device or when the required current exceeds 5A, causing the adapter to shut down or overheat. Always verify the monitor's label for 12V and 5A specifications before connecting.

Highlights

  • Delivers 60 W output for stable monitor operation
  • 12 V 5 A rating matches original adapter specifications
  • 5 mm by 2.5 mm barrel connector fits compatible LCD displays
  • New condition ensures reliable performance from first use

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the adapter is delivering 12V at 5A after connecting it to my LCD monitor?

Use a multimeter set to DC voltage and current modes; measure the 5.5 mm outer and 2.5 mm inner pins on the plug while the monitor is powered on to confirm 12 V and up to 5 A output.

Does the package include the CWT KPL-060F-VI power brick and the 5.5 x 2.5 mm DC cable, or must I source the cable separately?

The box contains the CWT KPL-060F-VI power supply unit with its attached 5.5 x 2.5 mm DC output cable; no additional cable purchase is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in S-Video Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.