We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OIAGLH

OIAGLH 12V 4A 48W 5.5x2.1mm SUN-1200400 SOY-1200400 AC adapter

SKU CH-YQ41-J4Q9A

Supplies 12 V at 4 A through a 5.5 x 2.1 mm barrel connector for monitor power

  • Delivers stable 12 V power for monitors
  • 4 A output handles 48 W load reliably
  • 5 mm × 2.1 mm barrel fits SUN-1200400 and SOY-1200400 models
  • New OIAGLH unit replaces original adapter directly

OIAGLH 12V 4A 48W AC Adapter

This OIAGLH adapter delivers 12 volts at 4 amps for a total of 48 watts. It uses a 5.5 mm by 2.1 mm barrel connector compatible with SUN-1200400 and SOY-1200400 models. The unit suits monitors and similar devices that require this exact voltage and connector size. It is not for equipment needing a different voltage, current rating or plug diameter.

Thermals Noise and Power Draw

The adapter converts mains power to 12 V DC at up to 48 W during normal operation. It runs without a fan so audible noise is minimal in typical use. Heat output scales with the connected load and stays within the design limits of the sealed enclosure. No active cooling or external heatsink is required.

Highlights

  • Delivers stable 12 V power for monitors
  • 4 A output handles 48 W load reliably
  • 5 mm × 2.1 mm barrel fits SUN-1200400 and SOY-1200400 models
  • New OIAGLH unit replaces original adapter directly

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 5.5 x 2.1 mm barrel plug to my monitor without reversing polarity?

Align the centre pin with the positive terminal and the outer sleeve with ground; the 12 V 4 A rating only delivers power when the tip polarity matches the monitor’s input marking.

When should I replace the 12 V 4 A adapter if the monitor starts flickering?

Replace it when output drops below 12 V under load or the 5.5 mm jack feels loose, as worn contacts or aged capacitors can no longer sustain the 48 W rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in S-Video Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.