OIAGLH
OIAGLH 12 V 60 W 5.5 × 2.5 mm s-video cable
A 12 V, 60 W power supply with a 5.5 × 2.5 mm barrel connector for monitors and chargers
- 12 V 60 W output powers compatible monitors
- 5 × 2.5 mm barrel fits matching DC jacks
- 5 A peak current handles startup surges
- New condition ensures full service life
Power adapter for 12 V monitors
This 12 V AC adapter delivers up to 60 W through a 5.5 mm by 2.5 mm barrel connector. It suits monitors and chargers that require a 12 V supply rated at 4 A, 4.16 A or 5 A. The unit is sold new and matches the YD-ZN1200500-6A and ADPC1260AB part references.
Thermal and power behaviour
The adapter operates at its rated 12 V output with a maximum load of 60 W during normal use. No fan or active cooling details are provided in the specifications. Power draw from the mains will vary with the connected device's actual consumption up to the 60 W limit.
Highlights
- 12 V 60 W output powers compatible monitors
- 5 × 2.5 mm barrel fits matching DC jacks
- 5 A peak current handles startup surges
- New condition ensures full service life
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 5.5 × 2.5 mm barrel connector and what step is often missed?
Align the 5.5 mm outer diameter and 2.5 mm inner pin with the device port, push straight in until fully seated, and verify the 12 V 60 W rating matches the equipment label before powering on.
What maintenance or replacement will the YD-ZN1200500-6A adapter need over time?
Inspect the cable strain relief and barrel tip for wear or loose fit; replace the unit if output voltage drifts from 12 V or if the 5 A / 4.16 A current capacity can no longer sustain the connected monitor.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
More in S-Video Cables
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
