OHKIKOME SATA Power Splitter Cord 19.7in Male to 5 Female Black
A 19.7 in SATA power splitter converts one male connector into five female ports for hard drives, SSDs and optical drives
- TypeBlack
- ColorBlack
- Connector DetailMale-to-Female
- Terminal GenderMale to Female
- Speed6 gigabits_per_second
- Specifications6 gigabits_per_second, Hard Drive, Personal Computer, CABLE,
- Powers five SATA drives from one PSU port
- 7 in right-angle cable keeps case airflow tidy
- 15-pin male plug splits to five female connectors
- Copper conductor delivers 3.3 V, 5 V and 12 V to every device
- Plug-and-play install needs no tools or extra power supply
Power expansion
This 19.7in SATA power splitter turns one male connector into five female ports so up to five drives can draw power from a single supply output. It suits builders adding multiple SSDs, hard drives or optical drives without replacing the power supply. The right-angle parallel layout keeps cables flat and tidy inside the case. Copper conductors carry 3.3 V, 5 V and 12 V across SATA I, II and III devices.
Thermals and noise
The cable is passive and generates no heat or sound of its own, so system thermals and acoustics are unchanged by the splitter itself. Flame-retardant PVC insulation resists damage during routing and helps prevent shorts. Power is distributed but not increased, so the supply must already provide enough wattage for every attached drive. No active cooling or fan headers are involved.
Sustained operation
Under continuous load the splitter simply passes whatever current the supply delivers, limited by the 15-pin connectors and copper conductors. Voltage rails remain stable as long as the source stays within its rated capacity. The right-angle female ends reduce strain on drive ports during long-term use. Builders needing more than five drives or higher total current must add another supply connection.
Highlights
- Powers five SATA drives from one PSU port
- 7 in right-angle cable keeps case airflow tidy
- 15-pin male plug splits to five female connectors
- Copper conductor delivers 3.3 V, 5 V and 12 V to every device
- Plug-and-play install needs no tools or extra power supply
Specifications
| Brand | OHKIKOME |
|---|---|
| Type | Black |
| Color | Black |
| Connector Detail | Male-to-Female |
| Terminal Gender | Male to Female |
| Speed | 6 gigabits_per_second |
| Specifications | 6 gigabits_per_second, Hard Drive, Personal Computer, CABLE, Black |
| Shielding | Black |
| Conductor | Copper Conductor |
| Construction | Hard drive, optical drive, computer fan Power Supply Cable |
| Refresh Rate | 60 hertz |
| Features | CABLE, Hard Drive, Personal Computer, Black |
| Disclaimer | not_applicable |
Questions about this item
How do I install the 19.7in SATA power splitter and what step do people get wrong?
Plug the single 15-pin male connector into the power supply, then attach up to five drives to the right-angle female connectors; the common mistake is forgetting to check that the PSU can deliver enough total wattage for all connected devices.
What maintenance or replacement will the splitter cable need later?
No scheduled maintenance is required; inspect the PVC jacket and right-angle connectors periodically and replace the cable only if you see cracked insulation, melted plastic or loose pins.
What limit shows up first when five drives run continuously on this splitter?
The power supply’s total 3.3 V, 5 V and 12 V current capacity is the first bottleneck; the splitter merely distributes existing power and does not increase it.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115819BTC
In stock
