OEM Industries
OEM Industries D2E133-AM47-01 230V dual inlet AC centrifugal blower
Dual-inlet AC centrifugal blower moves over 80 CFM at 1500-1800 RPM with 45-50 dBA noise and IP44 rating
- TypeCase Fan
- Bearing TypeBall
- RPM1500~ 1800 RPM
- Air Flow>80 CFM
- Noise Level45 - 50 dBA
- ColorSilver
- Dual-inlet design moves over 80 CFM for strong airflow
- IP44 rating protects against splashing water and dust ingress
- Ball bearing supports 1500 to 1800 RPM for reliable continuous operation
- Quiet 45 to 50 dBA noise level suits noise-sensitive environments
- 230 V AC at 50/60 Hz plugs directly into mains power
Industrial dual-inlet centrifugal blower
The OEM Industries D2E133-AM47-01 is a new AC centrifugal blower built for HVAC and industrial equipment that require a compact dual-inlet airflow path. It suits maintenance engineers and system integrators replacing a failed unit in air-handling cabinets, dust collectors or machinery enclosures. Buyers needing a DC-powered or PWM-controlled fan for PC cases cannot use this model.
230 V AC 50/60 Hz rated input
The blower operates directly from 230 V mains at 50 or 60 Hz, drawing 0.84 A at 50 Hz and 0.88 A at 60 Hz with a corresponding power draw of 190 W and 200 W. A 3 µF 450 V run capacitor is required for operation. The dual-inlet wheel spins between 1500 and 1800 RPM and moves more than 80 CFM. Systems without provision for a mains capacitor or a 230 V supply must select a different blower.
Ball-bearing thermals and acoustics
Ball bearings support the rotor for continuous duty in an IP44-rated housing rated for insulation Class B. In normal use the unit produces 45 to 50 dBA of noise while moving air through both inlets. The 190 to 200 W power draw reflects steady-state operation at rated voltage and frequency. Installers should verify that ducting and mounting can accommodate the airflow and vibration characteristics of a dual-inlet centrifugal design.
Highlights
- Dual-inlet design moves over 80 CFM for strong airflow
- IP44 rating protects against splashing water and dust ingress
- Ball bearing supports 1500 to 1800 RPM for reliable continuous operation
- Quiet 45 to 50 dBA noise level suits noise-sensitive environments
- 230 V AC at 50/60 Hz plugs directly into mains power
Specifications
| Series | D2E133-AM47-01 |
|---|---|
| Model | D2E133-AM47-01 |
| Type | Case Fan |
| Bearing Type | Ball |
| RPM | 1500~ 1800 RPM |
| Air Flow | >80 CFM |
| Noise Level | 45 - 50 dBA |
| Color | Silver |
| LED | Non-LED |
Questions about this item
What airflow can I expect once the blower is installed in a real system?
The unit delivers more than 80 CFM at its rated speed, so actual airflow in a machine will be at or above that figure depending on duct resistance.
How does the 230 V AC supply and IP44 rating limit where and how I can run the fan?
It operates on 230 V 50/60 Hz mains and draws 0.84 A at 50 Hz or 0.88 A at 60 Hz; the IP44 rating means it is protected against splashing water and solid objects over 1 mm.
What physical space and mounting provisions does the dual-inlet centrifugal housing need?
The blower uses a dual-inlet centrifugal housing with ball bearings; exact mounting hole pattern and overall dimensions are shown in the product images.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
