OEM Industries
OEM Industries CNL 60A DC48V/AC125V RQD-1 line protection
A 60 amp circuit protector rated for 48 V DC and 125 V AC line protection
- TypeCircuit Protectors
- Amps60
- 60 A rating protects circuits from damaging over-current
- Dual 48 V DC and 125 V AC voltage rating suits mixed-power systems
- CNL series design fits standard automotive fuse blocks
- RQD-1 form factor enables quick replacement in vehicle panels
- New condition ensures full factory-spec performance from day one
CNL 60A circuit protector for DC and AC circuits
This CNL 60A circuit protector is rated for 60 amps at 48 volts DC and 125 volts AC. It serves automotive and industrial electrical systems that require reliable over-current protection on a single line. Installers working on generator supplies, battery banks or distribution panels will find it matches the specified voltage and current envelope.
Sustained-load behaviour at rated current
The device carries 60 amps continuously until an over-current condition triggers the internal element to interrupt the circuit. It is designed to hold the rated load without nuisance tripping while responding to fault currents that exceed the 60 amp threshold. The dual voltage rating means the same protection characteristics apply whether the supply is 48 volts DC or 125 volts AC.
Straightforward panel or inline mounting
Mounting uses the standard CNL form factor, so the fuse slides into compatible fuse blocks or inline holders without special tools. The most common issue is selecting a holder rated for the same 48 volt DC and 125 volt AC limits; an undersized holder can overheat before the fuse operates. Verify the holder voltage rating and torque the terminals to the block manufacturer's specification.
Highlights
- 60 A rating protects circuits from damaging over-current
- Dual 48 V DC and 125 V AC voltage rating suits mixed-power systems
- CNL series design fits standard automotive fuse blocks
- RQD-1 form factor enables quick replacement in vehicle panels
- New condition ensures full factory-spec performance from day one
Specifications
| Series | CNL 60A |
|---|---|
| Model | CNL 60A |
| Type | Circuit Protectors |
| Amps | 60 |
Questions about this item
How much heat or power loss should I expect from the CNL 60A when it runs continuously at its 60 A rating?
The CNL 60A is a thermal-magnetic breaker; it carries 60 A with minimal voltage drop and only warms noticeably if the load approaches its trip threshold for extended periods.
What holder or fuse block do I already need to install this CNL 60A?
It requires a CNL-series bolt-down fuse block rated for at least 60 A and the system voltage you are using.
Will the CNL 60A coordinate with an existing 48 V DC distribution panel?
Yes — its DC rating is 48 V and it interrupts up to its rated breaking capacity, so it can serve as a branch protector in a 48 V DC panel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
