Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941005BTC
In stock
OATEY
OATEY 42752 Three-Quarter Top Grate, 3/4" Pipe Dia., PVC
A PVC floor-sink grate with a radial surface, 1,000 lb load capacity, and drop-in installation for compatible drain models
- TypeOther
- Supports 1,000 lb loads for heavy-duty drainage
- Radial grate surface improves water flow efficiency
- Drop-in installation fits existing floor drain sinks
- Compatible with models 42720, 42721, 42722 for easy replacement
- Meets ASME A 112.6.7 and ASTM D2665 standards
Three-Quarter Top Grate for Floor Drains
The OATEY 42752 is a white plastic grate designed for drop-in installation into compatible floor drain sinks. It measures 9 1/8 inches square with a 3/4 inch height and features a radial surface pattern. The grate supports a load capacity of 1,000 lb and meets ASME A 112.6.7 and ASTM D2665 standards. It is supplied new and unfinished.
Fits Specific OATEY Drain Models Only
This grate suits installers replacing or equipping OATEY floor drain sinks with model numbers 42720, 42721, or 42722. Builders needing a different load rating, an ADA-compliant surface, or a grate for a non-OATEY or differently sized drain body should look at other options. The unfinished white plastic may not match decorative finish requirements.
1,000 lb Load Capacity for Heavy Traffic
The single specification that decides fit is the 1,000 lb load capacity, which determines whether the grate withstands the expected floor traffic. Verify that the drain sink is one of the three compatible model numbers before purchase. The grate is not ADA compliant, so it does not meet accessibility standards for public facilities.
Highlights
- Supports 1,000 lb loads for heavy-duty drainage
- Radial grate surface improves water flow efficiency
- Drop-in installation fits existing floor drain sinks
- Compatible with models 42720, 42721, 42722 for easy replacement
- Meets ASME A 112.6.7 and ASTM D2665 standards
Specifications
| Brand | OATEY |
|---|---|
| Type | Other |
Questions about this item
Which floor sink models must I already have for the 42752 grate to fit?
The grate is compatible with OATEY models 42720, 42721 and 42722 floor sinks.
Will the 1,000 lb load rating hold if I keep my existing floor drain sink?
Yes, the grate is rated for 1,000 lb when installed in a compatible square floor drain sink.
How can I verify the grate meets code after dropping it in?
Confirm the installed grate sits flush at 3/4 in height and matches ASME A112.6.7 and ASTM D2665 markings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
