We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel conductivity probe with Ultem body, 12 mm diameter, 130 mm length, .91 m cable, round tip

Oakton Instruments

Oakton Instruments WD-35608-50 replacement probe for 536 meter

SKU CH-5062-3QDD4

Replacement conductivity probe for the 536 meter measures 0-200 mS with a 12 mm stainless-steel tip, 130 mm length and .91 m cable

  • TypeEnvironmental & Mechanical
  • Measures conductivity, TDS, pH and temperature up to 200 mS
  • Stainless-steel and Ultem body withstands 0 to 80 °C operating range
  • 12 mm diameter by 130 mm length fits Oakton 536 meter
  • Integrated temperature sensor enables automatic compensation during tests
  • 91 m cable with Oakton connector provides flexible placement

Replacement probe for 536 meter

This replacement conductivity probe is built for the Oakton 536 meter and measures conductivity, pH and temperature in a single tip. It covers a range of 0 to 200 mS and operates from 0 to 80 degrees C. The stainless steel and Ultem body is 12 mm in diameter and 130 mm long with a .91 m cable and an Oakton connector.

Field technicians needing a direct swap

It suits users who need a like-for-like replacement for a worn or damaged probe on the 536 meter and who work within ambient pressure conditions. It is not for buyers who require an integrated amplifier, a different connector type or a probe rated for pressurised environments.

Cable length and connector simplify installation

The .91 m cable and proprietary Oakton connector let the probe plug straight into the meter without adapters or splicing. A built-in temperature sensor means the meter can compensate readings automatically. The six-month shelf life means spares should be rotated regularly.

Highlights

  • Measures conductivity, TDS, pH and temperature up to 200 mS
  • Stainless-steel and Ultem body withstands 0 to 80 °C operating range
  • 12 mm diameter by 130 mm length fits Oakton 536 meter
  • Integrated temperature sensor enables automatic compensation during tests
  • 91 m cable with Oakton connector provides flexible placement

Specifications

BrandOAKTON
TypeEnvironmental & Mechanical

Questions about this item

Does the Oakton WD-35608-50 probe need a separate amplifier to connect to my 536 meter?

No, the probe has no built-in amplifier and connects directly to the 536 meter using the Oakton Connector.

Will the 12 mm diameter probe fit the same sample chambers I use with older Oakton probes?

The probe body is 12 mm in diameter and 130 mm long, so it fits chambers sized for that diameter.

How can I confirm the probe reads correctly after plugging it into the 536 meter?

Immerse the tip in a known conductivity standard; the meter should display a value within the 0-200 mS range and the temperature sensor should read 0-80 °C.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.