Nylavee SK100 2.0 Soundbar Bluetooth 5.0 3.5mm Aux USB/USB-C Powered
A 2.0 soundbar delivering 5 watts of stereo audio via Bluetooth 5.0 or 3.5 mm aux, powered by USB or USB-C with touch controls
- TypeSoundbar
- ColorBlack
- Configuration2.0
- Total Power5 watts
- Satellite RMS Power /ea5 watts
- Driverdynamic_driver
- Rich stereo sound from four speaker units and two bass diaphragms
- Bluetooth 5.0 and 3.5 mm aux give two ways to connect
- USB or USB-C power means no separate adapter is needed
- Single side knob controls volume, power and playback
- Compact 42-inch soundbar fits neatly under a monitor
Compact desktop soundbar for everyday audio
The Nylavee SK100 is a 2.0 stereo soundbar designed for desktop PCs, laptops and monitors. It delivers 5 watts of total power through four speaker units and two bass diaphragms in a 42.0-inch black enclosure. Bluetooth 5.0 and a 3.5mm aux input give two simple ways to connect phones, tablets or consoles. A single side knob controls all functions and a built-in microphone plus headphone jack add convenience for calls or private listening.
USB-powered operation with touch control
The bar draws 5 volts from any USB or USB-C port so no separate power brick is required. Touch-sensitive controls on the top surface handle volume and playback without a remote. The 72-decibel signal-to-noise ratio and 20 KHz frequency response indicate clean output for music, video and voice at typical desk distances. Neodymium magnet drivers and mica fibre diaphragms keep distortion low at moderate levels.
Step up from basic monitor speakers
Users moving up from integrated monitor audio or entry-level 2.0 sets gain richer bass and clearer highs from the dedicated diaphragms and cavity design. The upgrade is worth it when desk space is limited but stereo separation and a headphone jack are still needed. Buyers who want room-filling volume, a separate subwoofer or surround decoding should look at larger systems.
Highlights
- Rich stereo sound from four speaker units and two bass diaphragms
- Bluetooth 5.0 and 3.5 mm aux give two ways to connect
- USB or USB-C power means no separate adapter is needed
- Single side knob controls volume, power and playback
- Compact 42-inch soundbar fits neatly under a monitor
Specifications
| Brand | Nylavee |
|---|---|
| Model | SK100 |
| Part Number | SK100 |
| Type | Soundbar |
| Color | Black |
| Configuration | 2.0 |
| Total Power | 5 watts |
| Satellite RMS Power /ea | 5 watts |
| Driver | dynamic_driver |
| Frequency Response | 20 KHz |
| Signal to Noise Ratio(SNR) | 72 decibels |
| Power Supply | 5 volts |
| Remote | touch |
| Dimension | 6.0 in x 42.0 in x 7.0 in |
| Weight | 1.012 kilograms |
Questions about this item
How do I install the Nylavee SK100 soundbar and what step do people often miss?
Connect the USB or USB-C cable to a 5 V power source and the 3.5 mm aux cable to your device, or pair via Bluetooth 5.0; the step often missed is ensuring the power source actually delivers 5 volts so the unit turns on.
What maintenance or replacement will the SK100 need later?
The soundbar has no internal battery and no user-serviceable parts; keep the driver units dust-free and check the USB and aux cables for wear, replacing only the cables if they become damaged.
What limit appears first during sustained use of the SK100?
With 5 watts total power and a 72 dB signal-to-noise ratio, the volume ceiling and noise floor become noticeable before thermal limits, so extended high-volume playback hits output headroom first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
BFKK Hecate G1000 Black speaker 10W Bluetooth 5.3 12 RGB 2.5in 3.5mm
- Black



