Nycoil
Nycoil Tubing, 1/4" OD, Nylon, Red, 50 ft
Red nylon tubing with 1/4 in outside diameter, 11/64 in inside diameter, 50 ft length, 400 psi maximum pressure at 68 degrees F, and 175 degrees F maximum temperature
- Resists high pressure up to 400 psi at 68 degrees F
- Operates in heat up to 175 degrees F for demanding air lines
- Handles vacuum to 28 in Hg for suction applications
- Shore D 60 hardness keeps shape under repeated bending
- 50 ft red nylon coil simplifies routing and identification
Red nylon tubing for pneumatic lines
This 50 ft coil of red nylon tubing is sized at 1/4 in outside diameter with an 11/64 in bore. It is rated for 400 psi at 68 °F and handles vacuum down to 28 in Hg. The material suits compressed-air circuits in automotive, industrial or workshop environments.
Check pressure, temperature and chemical fit
Verify that your system never exceeds 400 psi or 175 °F during operation. Confirm the media is compatible with plain nylon; the tube has no jacket and carries a California Proposition 65 warning for cancer and reproductive harm. Ensure fittings accept 1/4 in OD without ferrules that could crush the thin wall.
Thermals and handling in service
The tubing remains flexible up to its 175 °F limit and does not generate heat or noise itself. Pressure drops stay low on typical shop runs of this length. No external power is required; simply route away from sharp edges and high-heat sources to maintain the 400 psi rating.
Highlights
- Resists high pressure up to 400 psi at 68 degrees F
- Operates in heat up to 175 degrees F for demanding air lines
- Handles vacuum to 28 in Hg for suction applications
- Shore D 60 hardness keeps shape under repeated bending
- 50 ft red nylon coil simplifies routing and identification
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
Does the 50 ft coil include fittings or do I need to buy them separately?
The coil is tubing only; fittings are not included and must be purchased separately.
Should I choose the 1/4 in OD nylon or a different material for 400 psi air lines?
This 1/4 in OD nylon tubing is rated 400 psi at 68 °F, making it suitable for high-pressure air applications.
Will the 400 psi rating hold at the 175 °F maximum temperature in my compressor line?
The 400 psi rating is specified at 68 °F; pressure capacity decreases as temperature rises toward the 175 °F limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



