We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue nylon tubing coil, quarter inch outer diameter, fifty feet length

Nycoil

Nycoil 1/4" OD Nylon Tubing Blue 50 ft

SKU CH-49CR-QYT43

Blue nylon tubing rated to 400 psi at 68 degrees F, 50 ft length with 1/4 in outside diameter

  • Blue colour aids quick line identification
  • Nylon construction resists wear and chemicals
  • 400 psi rating at 68 Degrees F handles demanding air systems
  • 50 ft continuous length reduces joints and leaks
  • Shore D 60 hardness keeps shape under pressure

Blue Nylon Tubing 50 ft

Zoro Select 1/4 in OD nylon tubing comes in a 50 ft blue coil rated for 400 psi at 68 Degrees F. The 11/64 in inside diameter and Shore D 60 hardness suit compressed-air lines and general fluid transfer. Supplied without a jacket for direct fitting attachment.

Suits air-line runs up to 175 Degrees F

Installers needing vacuum service to 28 in Hg or moderate heat resistance will find this tube adequate. Buyers who need higher pressure ratings, tighter bend radiuses or a jacketed construction for abrasion protection should select a different product.

400 psi working pressure at 68 Degrees F

This single pressure figure determines whether the tubing matches your system design. Verify that your circuit never exceeds this limit at the operating temperature before purchase.

Highlights

  • Blue colour aids quick line identification
  • Nylon construction resists wear and chemicals
  • 400 psi rating at 68 Degrees F handles demanding air systems
  • 50 ft continuous length reduces joints and leaks
  • Shore D 60 hardness keeps shape under pressure

Specifications

BrandZORO SELECT

Questions about this item

How much pressure can the 1/4 in OD nylon tube handle at 68 Degrees F?

The tubing is rated for a maximum operating pressure of 400 psi at 68 Degrees F, and it can withstand up to 28 in Hg of vacuum.

What fittings are needed for the 11/64 in inside diameter?

You will need fittings that seal on a 1/4 in outside diameter with an 11/64 in bore; standard push-to-connect or compression fittings for 1/4 in OD nylon work.

Will the 50 ft coil stay flexible when routed near parts that reach 175 Degrees F?

Yes, the nylon material is rated for a maximum operating temperature of 175 Degrees F and has a Shore D 60 hardness that resists softening at that temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.