We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nylon tubing coil, 1/2 inch OD, 250 ft length

Nycoil

Nycoil 1/2" OD Nylon Tubing Black 250 ft

SKU CH-08N6-KXP19

Black nylon tubing rated 267 psi at 68 °F with 3/8 in ID and 250 ft length

  • Rated for 267 psi at 68 °F for high-pressure air lines
  • Withstands 200 °F continuous service temperature
  • Shore D 60 hardness resists kinking and abrasion
  • 250 ft continuous length reduces splice points
  • 28 in Hg vacuum rating supports suction applications

Half-inch OD nylon air line

This half-inch outside-diameter nylon tubing is built for compressed-air distribution in workshops, mobile service rigs and light industrial plants. The 250-foot coil supplies long continuous runs without splices. Shore D 60 hardness keeps the tube rigid enough for push-to-connect fittings while still allowing gradual bends. Black pigmentation provides UV resistance for exposed routing.

Replaces brittle rubber and kinked poly lines

Rubber hose that cracks at 200 °F or collapses under 28 in Hg vacuum is the typical failure point this tubing eliminates. The jump is worth it when runs exceed 50 feet and you need 267 psi at 68 °F without pressure drop from repeated fittings. It is not for buyers who need peristaltic-pump compatibility or a jacketed hose for abrasive drag.

Fits standard push-to-connect and barbed fittings

The 3/8-inch inside diameter matches common quarter-turn couplers and manifold ports, so no special adapters are required. Nylon material frees up routing space because it holds shape without external supports. California Proposition 65 warnings apply; the product contains a chemical known to the state to cause cancer and reproductive harm.

Highlights

  • Rated for 267 psi at 68 °F for high-pressure air lines
  • Withstands 200 °F continuous service temperature
  • Shore D 60 hardness resists kinking and abrasion
  • 250 ft continuous length reduces splice points
  • 28 in Hg vacuum rating supports suction applications

Specifications

BrandZoro Select

Questions about this item

What fittings fit the 1/2 in outside diameter and 3/8 in inside diameter of this nylon tubing?

Use push-to-connect or compression fittings sized for 1/2 in OD and 3/8 in ID tubing. Verify the fitting’s grip range matches the Shore D 60 hardness so the collet seats without crushing the wall.

How do I make a leak-free connection, and what step is most often missed?

Cut the tube square with a sharp tubing cutter, deburr the inside edge, then push fully into the fitting until the collet clicks. The missed step is forgetting to pull back gently to confirm the teeth have engaged the nylon.

When should I replace this tubing given the 267 psi rating at 68 Degrees F and 200 Degrees F max temperature?

Inspect regularly for discoloration, surface crazing or stiffness changes. Replace immediately if the tube sees pressures near 267 psi at elevated temperatures or if vacuum exceeds 28 in Hg, as both accelerate fatigue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.