We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow multimode fiber cable with MPO12 APC connectors on both ends, 65.62 ft

NVIDIA

NVIDIA MFP7E10-N020 65.62 ft Passive Fiber Cable MPO12 APC to MPO12 APC

SKU CH-795X-W221B MPN MFP7E10-N020

A 65.62 ft passive multimode fiber cable with MPO12 APC connectors on both ends for linking InfiniBand and Ethernet transceivers

  • Length65.62 ft.
  • 20 m multimode fiber spans rack-to-rack links
  • MPO12 APC connectors align TX to RX fibers
  • Passive design needs no power or active electronics
  • Type-B crossover routing matches pin 1 to pin 12
  • Tested for reliable InfiniBand and Ethernet installs

20 m passive multimode fibre cable

The NVIDIA MFP7E10-N020 is a 20 metre passive multimode fibre cable terminated with MPO-12 APC connectors on both ends. It is built for data-centre links that join twin-port OSFP, single-port OSFP or QSFP112 transceivers across InfiniBand and Ethernet fabrics. The crossover Type-B fibre routing aligns transmit on pin 1 to receive on pin 12 for direct transceiver-to-transceiver connections.

Check connector and fibre type before ordering

Verify that both transceivers present MPO-12 APC interfaces and support multimode fibre. Confirm the link distance does not exceed the 20 metre reach of this passive assembly. Ensure the host ports expect Type-B crossover polarity so the transmit and receive fibres align correctly without an additional patch panel or cassette.

Suits direct OSFP and QSFP112 interconnects

This cable suits engineers wiring OSFP or QSFP112 transceivers directly in multimode InfiniBand or Ethernet clusters. It is not for single-mode fibre runs, nor for links requiring active signal conditioning beyond 20 metres. Buyers needing LC, MTP or other connector styles should select a different assembly.

Highlights

  • 20 m multimode fiber spans rack-to-rack links
  • MPO12 APC connectors align TX to RX fibers
  • Passive design needs no power or active electronics
  • Type-B crossover routing matches pin 1 to pin 12
  • Tested for reliable InfiniBand and Ethernet installs

Specifications

Length65.62 ft.

Questions about this item

Does the MFP7E10-N020 arrive with any transceivers or cleaning tools, or must those be purchased separately?

The 65.62 ft passive cable has MPO-12/APC multi-mode connectors on both ends; transceivers and cleaning accessories are not included.

Is the 20 m multimode MPO-12/APC cable the only length or fibre type offered under this part number?

The MFP7E10-N020 is specified as a 20 m multimode passive fibre cable with MPO-12/APC connectors; other lengths or single-mode variants carry different part numbers.

How does the Type-B crossover wiring in this 20 m cable affect the link when I connect two OSFP or QSFP112 transceivers?

The crossover aligns transmit on pin 1 to receive on pin 12 at the opposite end, allowing two transceivers to link directly without a patch panel.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.