NuoTo
NuoTo MLT-D116L toner cartridge 2-pack black
Two-pack of compatible black toner cartridges rated for 6,000 pages each, designed for Samsung SL-M2625, SL-M2675, SL-M2825, SL-M2835, SL-M2875 and SL-M2885 laser printers
- High-yield printing with 6000 pages per cartridge
- Compatible with Samsung SL-M2825DW SL-M2835DW SL-M2875FD SL-M2875FW SL-M2885FW SL-M2625D SL-M2825FD SL-M2675F
- ISO9001 and ISO14001 factory standards ensure consistent quality
- Two black cartridges included for extended printing capacity
- Particle size 7-10 microns and blackness value 1.48 deliver sharp text
Two-pack black toner for Samsung printers
This NuoTo two-pack replaces the Samsung MLT-D116L cartridge and fits the SL-M2825DW, SL-M2835DW, SL-M2875FD, SL-M2875FW, SL-M2885FW, SL-M2625D, SL-M2825FD and SL-M2675F models. Each cartridge yields up to 6000 pages at five-percent coverage. The product is new and built to ISO9001 and ISO14001 factory standards.
Thermal and power behaviour in normal use
Laser printing fuses toner with heat, so the printer’s fuser unit warms during each job and cools between pages. The toner formulation uses particles of seven to ten microns with a blackness value of 1.48, which aids consistent flow and charge stability. Waste powder rate stays within five percent, reducing residue inside the printer.
Bundled accessories and their effect
The box contains two black toner cartridges sealed in multilayer shockproof packaging to prevent damage during transit. No separate software, chips or tools are included; installation follows the printer’s standard cartridge-replacement procedure. Buyers who need colour output or a higher-capacity single cartridge will not be served by this pack.
Highlights
- High-yield printing with 6000 pages per cartridge
- Compatible with Samsung SL-M2825DW SL-M2835DW SL-M2875FD SL-M2875FW SL-M2885FW SL-M2625D SL-M2825FD SL-M2675F
- ISO9001 and ISO14001 factory standards ensure consistent quality
- Two black cartridges included for extended printing capacity
- Particle size 7-10 microns and blackness value 1.48 deliver sharp text
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the NuoTo MLT-D116L toner cartridge and what step is commonly missed?
Open the printer front cover, remove the old cartridge, gently shake the new NuoTo MLT-D116L cartridge side-to-side five or six times to distribute toner evenly, pull the sealing tape straight out, then insert the cartridge until it clicks.
What maintenance or replacement will the NuoTo MLT-D116L cartridge need later?
Replace the cartridge after approximately 6,000 pages at 5 % coverage; the printer will signal low toner when the carbon powder is depleted.
What limit appears first during sustained printing with the NuoTo MLT-D116L cartridge?
The 6,000-page yield at 5 % coverage is the first limit; heavy graphics or dense text will reach it sooner.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



