We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five 12mm square tactile switches with coloured caps on small PCBs

NuoTo

NuoTo 5pcs 12x12mm Key Module Switch with Cap for Arduino Raspberry Pi

SKU CH-ZG1C-HSFZ4

Pack of five 12 mm tactile switch modules with caps, 3.5–5 V digital output for microcontroller and Raspberry Pi projects

  • CPU TypeOther
  • Five tactile switch modules ready for microcontroller projects
  • 12 mm square actuator with integrated key cap for comfortable pressing
  • Digital high-level output when pressed simplifies code logic
  • Operates from 3.5 V to 5 V matching common logic levels
  • Three-pin S V G interface connects directly to Arduino or Raspberry Pi

Five tactile switch modules for microcontroller

This pack contains five 12 mm key modules with integrated caps and a 3-pin digital output. Each board measures 11 by 22 mm and operates from 3.5 to 5 V, delivering a high level when pressed and a low level when released. The modules are designed for direct connection to Arduino, Raspberry Pi or similar MCU and ARM platforms.

Makers adding simple push-button input

Suitable for hobbyists and students who need momentary tactile switches with pre-soldered caps for quick prototyping. Not suitable for applications requiring analogue output, latching action, surface-mount footprints or higher voltage switching beyond the 5 V logic range.

3-pin digital interface with high-on-press logic

The defining specification is the 3-pin S-V-G interface that outputs a digital high signal on press and low on release at 3.5 to 5 V. This determines compatibility with the target microcontroller GPIO pins and removes the need for external pull-up resistors in most designs.

Highlights

  • Five tactile switch modules ready for microcontroller projects
  • 12 mm square actuator with integrated key cap for comfortable pressing
  • Digital high-level output when pressed simplifies code logic
  • Operates from 3.5 V to 5 V matching common logic levels
  • Three-pin S V G interface connects directly to Arduino or Raspberry Pi

Specifications

CPU TypeOther

Questions about this item

How do I choose among the five 12x12mm key modules in the pack?

All five modules are identical 11 x 22 mm boards with a 3.5–5 V supply and a 3-pin S-V-G interface, so any one works the same way on Arduino or Raspberry Pi.

What does the 3.5–5 V supply range mean when the module is wired into a project?

The board powers from 3.5 to 5 V and its output goes high when pressed and low when released, matching the logic levels of common MCUs and Raspberry Pi GPIO pins.

What does the 3-pin S-V-G interface cap in practice?

The three pins carry supply, ground and a single digital output, so the module only reports press or release — no analog levels, no communication protocol, just a clean on/off signal.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.