NUOLAISUN
NUOLAISUN LM238WF5-SSD1 1920×1080 Touch Screen for HP 24-K 24-k0205st
24-inch 1920×1080 touch panel replaces the screen on HP 24-K 24-k0205st all-in-one PCs
- Full HD 1920×1080 touch clarity for vivid detail
- Direct fit for HP 24-K 24-k0205st all-in-one units
- LM238WF5-SSD1 panel ensures exact model match
- Brand-new NUOLAISUN screen ready for professional install
- Touch panel only — no extra parts included
Compatible HP 24-K Touch Panel
The NUOLAISUN LM238WF5-SSD1 is a 1920×1080 replacement LCD for HP 24-K series all-in-one desktops, specifically matching the 24-k0205st model. It arrives new and includes the touch digitiser layer integrated into the panel. Only the screen assembly is supplied; no mounting brackets, cables or tools are included.
Buyers verifying exact part numbers
This unit suits owners of the listed HP 24-K model who have confirmed the LM238WF5-SSD1 part code on their original screen label. It is not suitable for non-touch variants, different resolutions, or other HP series where the connector pin-out or mounting points differ. Installers must disconnect power and battery cables before fitting the fragile glass panel.
1920×1080 resolution confirms fit
The decisive specification is the 1920×1080 native resolution combined with the LM238WF5-SSD1 manufacturer part number. Matching both figures to the original screen ensures the video signal timing and touch controller interface align correctly with the system board.
Highlights
- Full HD 1920×1080 touch clarity for vivid detail
- Direct fit for HP 24-K 24-k0205st all-in-one units
- LM238WF5-SSD1 panel ensures exact model match
- Brand-new NUOLAISUN screen ready for professional install
- Touch panel only — no extra parts included
Specifications
No published specifications for this item yet.
Questions about this item
Will the 238 mm panel fit inside the HP 24-K 24-k0205st bezel?
The LM238WF5-SSD1 is built for the HP 24-K series 24-k0205st, so its mounting tabs and outline match the original bezel cut-out.
What is the correct order for disconnecting power before fitting the touch screen?
Remove the AC adapter first, then detach the battery cable, and only then unplug the display ribbon to avoid a short on the 1920×1080 panel.
How often should the adhesive securing the 1080p touch layer be inspected?
Check the perimeter adhesive once a year; if the panel ever develops a gap or dust ingress, re-seal it with fresh double-sided tape before moisture reaches the FHD layer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



