NUOLAISUN
NUOLAISUN 24.0" 4.5K LCD screen for iMac A2438 M1 2021 4-Port Blue
24.0 inch 4.5K LCD replacement screen for iMac A2438 M1 2021 with four ports in blue
- 5K resolution for sharp 24.0" visuals
- Designed for iMac A2438 M1 2021 4-Port model
- Matches EMC 3663 and part 661-16575
- LCD digitizer assembly with 4480x2520 pixel density
- Blue finish aligns with original iMac colour
24.0" 4.5K LCD for iMac A2438 M1 2021
This replacement screen matches the 24.0 inch 4.5K panel used in the iMac A2438 M1 2021 model with four ports. It is intended for owners of that specific all-in-one who need a new display assembly due to damage or failure.
Replaces the original EMC 3663 display assembly
The part number 661-16575 and compatible codes MGPC3xx/A, MGPD3xx/A and MGPF3xx/A identify the exact factory unit this screen substitutes. The upgrade is worth it when the existing panel is cracked, shows dead pixels or has backlight issues that prevent normal use.
Verify the back-label model before ordering
Confirm the resolution 4480X2520, the data cable pin count and the internal model code printed on the rear of the old screen. Professional installation is required and the power adapter plus battery cable must be disconnected during the swap.
Highlights
- 5K resolution for sharp 24.0" visuals
- Designed for iMac A2438 M1 2021 4-Port model
- Matches EMC 3663 and part 661-16575
- LCD digitizer assembly with 4480x2520 pixel density
- Blue finish aligns with original iMac colour
Specifications
No published specifications for this item yet.
Questions about this item
Will the 24.0" 4.5K LCD assembly fit the iMac A2438 M1 2021 with EMC 3663?
Yes, the assembly matches the iMac A2438 M1 2021 EMC 3663 and part numbers MGPC3xx/A, MGPD3xx/A, MGPF3xx/A with resolution 4480X2520.
Which cables must be disconnected before fitting the 661-16575 display assembly?
Disconnect the power adapter and battery cable before installation; the supplier notes that no instructions are included and professional fitting is recommended.
Does the blue LCD panel require any periodic calibration or adhesive renewal?
The product is a replacement LCD digitizer assembly only; the supplier provides no maintenance schedule or adhesive renewal guidance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



