NUOLAISUN
NUOLAISUN 16.0" laptop screen FHD+ 1920x1200 30pin
16.0" FHD+ 1920x1200 30-pin replacement screen for Lenovo ThinkPad E16 Gen 1 and Gen 2 models
- FHD+ 1920x1200 resolution for sharp detail
- 0 inch display fits Lenovo ThinkPad E16 Gen 1 2
- 30 pin connector matches original screen interface
- New replacement panel ready for professional installation
- Compatible with multiple part numbers including 5D10V82439 5D10V82440 5D10V82408
16.0" FHD+ 30-pin replacement screen
The NUOLAISUN 16.0-inch LCD panel delivers a 1920x1200 resolution through a 30-pin connector. It is built as a direct replacement screen for compatible Lenovo ThinkPad E16 Gen 1 and Gen 2 models. The unit is supplied new and includes the display panel only.
Suitable for owners of listed ThinkPad E16 variants
This screen matches machines using part numbers such as 5D10V82439, 5D10V82440 and 5D10V82408 across type codes 21JN, 21JQ, 21JT, 21JU, 21M5, 21M6, 21MA and 21MB. Buyers who need a touch-enabled panel or a different pin configuration should look elsewhere.
30-pin FHD+ non-touch interface
The single decisive specification is the 30-pin data cable paired with a 1920x1200 non-touch panel. Verify the exact part number on the back of your original screen before ordering to ensure the connector and resolution match.
Highlights
- FHD+ 1920x1200 resolution for sharp detail
- 0 inch display fits Lenovo ThinkPad E16 Gen 1 2
- 30 pin connector matches original screen interface
- New replacement panel ready for professional installation
- Compatible with multiple part numbers including 5D10V82439 5D10V82440 5D10V82408
Specifications
No published specifications for this item yet.
Questions about this item
What resolution does the 30-pin eDP interface on this 16.0" panel support?
The 30-pin connector carries a native 1920x1200 signal; the panel cannot exceed that resolution.
Which mounting pattern and connector orientation does this screen need to fit a ThinkPad E16 Gen 1 or Gen 2 chassis?
It matches the original 16.0" non-touch brackets and a bottom-mounted 30-pin eDP cable on the right side.
What is the correct installation sequence to avoid shorting the new LCD?
Disconnect the AC adapter and the internal battery cable first, then swap the panel; reconnect battery before AC power.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



