NUOLAISUN
NUOLAISUN 14.0" LCD Touch Screen 1920x1080 40pin 60Hz for Dell 7420 7410
14.0" Full HD touch panel, 40-pin 60 Hz, fits Dell Latitude 7420 and 7410 models
- Full HD clarity on a 14.0 inch touch panel
- 1920 x 1080 resolution for sharp detail
- 40 pin connector fits Dell 7420 and 7410
- 60 Hz refresh delivers smooth visuals
- Brand new NUOLAISUN screen ready for professional install
14.0" Full HD Touch Panel
This 14.0-inch LCD touch screen delivers a 1920x1080 resolution at 60Hz. It uses a 40-pin connector and carries part numbers N140HCN-G53, NV140FHM-T02 and DPN 0JN7TT. The panel is built as a direct replacement for Dell Latitude 14 7420 and 7410 laptops.
Fits Latitude 7420 and 7410 owners
The display matches the P135G specification used in those two models. Buyers who need a different connector count, a higher refresh rate or a non-touch variant should look elsewhere. Verifying the exact part number on the original screen is essential before ordering.
40-pin connector decides compatibility
The 40-pin interface is the single specification that determines whether this panel will work. If the original screen uses a different pin count or a different video signal format, this unit will not connect. Always compare the part number printed on the back of the old display.
Highlights
- Full HD clarity on a 14.0 inch touch panel
- 1920 x 1080 resolution for sharp detail
- 40 pin connector fits Dell 7420 and 7410
- 60 Hz refresh delivers smooth visuals
- Brand new NUOLAISUN screen ready for professional install
Specifications
No published specifications for this item yet.
Questions about this item
Will the 40-pin connector on this 14.0" panel plug straight into the eDP cable inside my Dell Latitude 7420?
Yes, the screen uses a 40-pin interface that matches the eDP cable fitted to the Latitude 7420 and 7410 models listed.
Can I keep the original touch-digitiser glass and just swap the 1920x1080 LCD layer underneath?
No, this is a complete touch-screen assembly; the digitiser and LCD are bonded together and must be replaced as one unit.
After fitting the panel, how do I confirm the 60 Hz refresh rate is actually active in Windows?
Open Settings > System > Display > Advanced display and verify the refresh-rate dropdown shows 60 Hz for the internal display.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



