NUOLAISUN
NUOLAISUN 11.6 inch 30pin HD 1366x768 LCD Touch Screen Digitizer Assembly
11.6-inch 1366×768 HD touch digitizer with a 30-pin connector for Lenovo 500e Chromebook Gen 4s models 83N8, 83N9, 83L4 and 83L5
- 6 inch HD display for clear viewing
- 1366x768 resolution delivers sharp detail
- 30-pin connector matches original part
- Touch digitizer restores full input control
- Compatible with Lenovo 500e Chromebook Gen 4s
Compatible Lenovo Chromebook Models
This replacement screen fits the Lenovo 500e Chromebook Gen 4s across model numbers 83N8, 83N9, 83L4, 83L5 and 83L40001US. It is intended for repair technicians or owners replacing a damaged display on these specific devices.
11.6 Inch HD Touch Panel
The assembly delivers a 1366 by 768 resolution on an 11.6 inch diagonal with a 30 pin data connector. It covers everyday Chrome OS tasks and classroom use, while the HD panel limits detail for high-resolution media or external monitoring.
Glass Assembly Requires Professional Install
The package contains only the fragile LCD touch digitizer glass without a laptop chassis or installation instructions. Power and battery cables must be disconnected before fitting, and the original packaging should stay sealed if the part number does not match the original screen label.
Highlights
- 6 inch HD display for clear viewing
- 1366x768 resolution delivers sharp detail
- 30-pin connector matches original part
- Touch digitizer restores full input control
- Compatible with Lenovo 500e Chromebook Gen 4s
Specifications
No published specifications for this item yet.
Questions about this item
Will the 30-pin connector on this 11.6 inch screen work with the original cable in my 500e Chromebook Gen 4s?
Yes, the assembly uses a 30-pin interface that matches the factory cable on the 500e Chromebook Gen 4s models listed, so the existing ribbon plugs straight in.
How can I verify the 1366x768 touch panel is functioning correctly after installation?
Power on the Chromebook, confirm the desktop appears at 1366x768 without dead pixels, then tap and swipe across the surface — touch input should register immediately at every point.
Does the package include the 30-pin cable or adhesive strips, or do I need to source them separately?
The box contains only the LCD touch screen digitizer assembly; the 30-pin video cable and any mounting adhesive must be reused from the original screen or purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



