Ntn
NTN UC319 Insert Bearing 95x200x51mm electrician tool
Insert bearing measuring 95 by 200 by 51 millimetres supports rotating shafts in electrician tool applications
- 95 mm inner diameter fits standard shafts
- 200 mm outer diameter supports heavy radial loads
- 51 mm width increases load capacity
- NTN manufacturing ensures consistent precision
- New condition guarantees full service life
NTN UC319 Insert Bearing 95x200x51mm
The NTN UC319 is a new insert bearing manufactured by NTN. It measures 95mm by 200mm by 51mm and carries the model number UC319. This component is designed for use in electrician tools and related power-tool applications where a precision bearing of this size is required.
Maintenance teams replacing worn bearings
Technicians servicing electrician tools that specify a UC319 insert bearing will find this part a direct fit. It is not suitable for applications requiring different bore diameters, outer diameters or widths, nor for tools that call for a different bearing series or sealing arrangement.
95mm bore 200mm outer diameter 51mm width
The critical specification is the 95mm bore, 200mm outer diameter and 51mm width, identified as model UC319. Confirm these three dimensions against your equipment manual before ordering to ensure the bearing matches the housing and shaft exactly.
Highlights
- 95 mm inner diameter fits standard shafts
- 200 mm outer diameter supports heavy radial loads
- 51 mm width increases load capacity
- NTN manufacturing ensures consistent precision
- New condition guarantees full service life
Specifications
| Brand | NTN |
|---|---|
| Model | NTN UC319 |
Questions about this item
What shaft diameter does the UC319 bearing's 95 mm bore require?
The 95 mm bore fits a shaft of that exact diameter, so the buyer must already have a 95 mm shaft or an adapter sleeve to match.
Will the 200 mm outer diameter clear the housing on my existing equipment?
The 200 mm outside diameter needs a housing bore of the same size; measure the current housing to confirm the UC319 will seat without interference.
How can I verify the 51 mm width is seated correctly after installation?
After pressing the bearing in, measure the installed width — it should read 51 mm — and rotate the shaft to feel for smooth, consistent motion without binding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
