Ntn
NTN UC311 insert bearing 55x120x34mm electrician tool
Insert bearing with 55 mm bore, 120 mm outside diameter and 34 mm width for shaft mounting
- Precision shaft support from 55 mm inner diameter
- High load capacity with 120 mm outer diameter
- Compact 34 mm width fits tight housings
- Trusted NTN manufacturing quality
- Ready for immediate installation in new condition
NTN UC311 Insert Bearing 55x120x34mm
The NTN UC311 is a single-row radial insert bearing with a 55 mm bore, 120 mm outer diameter and 34 mm width. It suits electricians and maintenance technicians who need a direct replacement for worn units in motor housings or conveyor rollers.
Sealed lubrication holds under continuous rotation
The bearing ships pre-greased with contact seals on both sides, so lubricant stays in and contaminants stay out during extended duty cycles. Heat buildup remains moderate because the internal clearance matches the UC311 specification for steady-speed operation.
Slip-fit mounting on standard shafts
The inner ring slides onto a 55 mm shaft and locks with two set screws, requiring only a hex key and no press tools. Misalignment beyond the bearing's limited self-aligning capacity causes premature wear, so verify shaft straightness before tightening.
Highlights
- Precision shaft support from 55 mm inner diameter
- High load capacity with 120 mm outer diameter
- Compact 34 mm width fits tight housings
- Trusted NTN manufacturing quality
- Ready for immediate installation in new condition
Specifications
| Brand | NTN |
|---|---|
| Model | NTN UC311 |
Questions about this item
How much heat does the NTN UC311 generate during continuous daily operation?
The NTN UC311 is a passive mechanical component with no electrical input, so it produces no heat of its own during operation.
What shaft size and housing bore are required to mount the NTN UC311?
The NTN UC311 requires a 55 mm shaft diameter and a 120 mm housing bore for proper installation.
Can the NTN UC311 replace an older UC311 bearing with the same 55x120x34 mm dimensions?
Yes, the NTN UC311 matches the standard 55x120x34 mm envelope, making it a direct dimensional replacement for existing UC311 units.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
