NSY Audio NSY-BS401 2.0 Bookshelf Speakers 100W Bluetooth 5.3
Active 2.0 bookshelf speakers with 100 W power, Bluetooth 5.3 and RCA inputs
- TypeBookshelf
- ColorBlack
- Configuration2.0
- Total Power100 watts
- Satellite RMS Power /ea100 watts
- Driverdynamic_driver
- Studio-grade accuracy from 4-inch woofer and 1-inch silk dome tweeter
- 100 W total power with resonance-free wooden enclosure
- Bluetooth 5.3 low-latency wireless plus RCA and 3.5 mm wired inputs
- Compact 6.2 x 6.3 x 9.5 in bookshelf footprint fits any desk
- Plug-and-play setup with included cables for instant use
NSY-BS401 Active Bookshelf Pair
The NSY-BS401 is a pair of active 2.0 bookshelf speakers with a built-in amplifier. They connect to a computer, audio interface or turntable through RCA or 3.5 mm inputs, and also support Bluetooth 5.3 for wireless playback.
Upgrade from basic plastic PC speakers
The wooden enclosure reduces cabinet resonance that colours the sound on inexpensive plastic units. Buyers who need more low-frequency extension or a separate subwoofer output will not find those features here.
80 W peak power with 4-inch woofer
The 4-inch driver and 1-inch silk dome tweeter deliver clear highs and tight bass at desktop listening distances. At higher volumes in larger rooms the 80 W peak limit and 4-ohm impedance mean headroom runs out before the system can fill the space.
Highlights
- Studio-grade accuracy from 4-inch woofer and 1-inch silk dome tweeter
- 100 W total power with resonance-free wooden enclosure
- Bluetooth 5.3 low-latency wireless plus RCA and 3.5 mm wired inputs
- Compact 6.2 x 6.3 x 9.5 in bookshelf footprint fits any desk
- Plug-and-play setup with included cables for instant use
Specifications
| Brand | NSY Audio |
|---|---|
| Series | 0 |
| Model | NSY-BS401 |
| Part Number | BS401 |
| Type | Bookshelf |
| Color | Black |
| Configuration | 2.0 |
| Total Power | 100 watts |
| Satellite RMS Power /ea | 100 watts |
| Driver | dynamic_driver |
| Frequency Response | 20 KHz |
| Impedance | 4 ohm |
| Signal to Noise Ratio(SNR) | 80 decibels |
| Power Supply | 120 volts |
| Remote | remote |
| Dimension | 6.2 in x 6.3 in x 9.5 in |
| Weight | 5.012 kilograms |
Questions about this item
How much shelf depth do the NSY-BS401 speakers need?
Each cabinet measures 6.2 in wide, 6.3 in deep and 9.5 in high, so allow at least 6.3 in of shelf depth plus a few centimetres behind for the rear‑facing ports and cable bends.
Which cable do I connect first when setting up the active speaker pair?
Link the two cabinets with the supplied speaker wire before plugging the RCA or 3.5 mm source cable into the master unit, then apply mains power.
When should I replace the 4‑inch woofer surrounds on the NSY-BS401?
Inspect the rubber surrounds every few years; if they show cracking, stiffening or audible distortion at moderate volume, have a technician re‑foam the drivers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Cables To Go 39908 5 in Wall Mount Speaker 70V
- Consumer Electronics
LG Electronics SQC4R-CR 4.1 Channel Wireless Subwoofer Speaker Kit
- Kit



