NShi
NShi server chassis 500W SMPS 12V 6A AC110V/240V DC5V/12V/24V/36V 60A
Desktop server chassis with an integrated 500 W industrial SMPS delivering 12 V at 6 A from AC 110/240 V input and providing DC 5/12/24/36 V outputs up to 60 A
- Chassis TypeDesktop
- Industrial-grade power for servers and equipment
- Wide AC 110 V to 240 V input suits global mains
- Multiple DC outputs at 5 V, 12 V, 24 V, 36 V
- 500 W capacity with 60 A peak current delivery
- Built-in over-voltage, over-current and short-circuit protection
Industrial server chassis with multi-voltage output
This desktop server chassis integrates a 500 W industrial power supply that accepts AC 110 V or 240 V input and delivers DC outputs at 5 V, 12 V, 24 V and 36 V. It is built for system integrators and lab environments that need a single enclosure to feed several voltage rails simultaneously.
500 W capacity with 60 A peak on the 12 V rail
The unit supplies up to 60 A combined across its outputs, with the 12 V rail rated at 6 A continuous. This headroom handles typical industrial controllers, drives and sensor arrays, while loads that exceed the 500 W total or the per-rail limits will trigger the built-in protection circuits.
Metal and aluminium shell with CCC.
The rugged metal-and-aluminium case operates from 0 °C to 40 °C and stores safely down to -20 °C. Over-voltage, over-current and short-circuit protection are integrated, and the non-condensing humidity rating up to 95 % suits harsh indoor installations. Builders needing hot-swap bays or redundant supplies must look elsewhere.
Highlights
- Industrial-grade power for servers and equipment
- Wide AC 110 V to 240 V input suits global mains
- Multiple DC outputs at 5 V, 12 V, 24 V, 36 V
- 500 W capacity with 60 A peak current delivery
- Built-in over-voltage, over-current and short-circuit protection
Specifications
| Chassis Type | Desktop |
|---|
Questions about this item
Will the 12 V 6 A output run my older PCI cards that need 5 V and 12 V rails?
The unit provides DC 5 V, 12 V, 24 V and 36 V simultaneously with a combined current capacity up to 60 A, so legacy 5 V and 12 V cards can draw from their respective rails.
How can I confirm the supply is delivering stable voltage after installation?
Measure each output rail with a multimeter; the 12 V rail should read close to 12 V under load, and the built-in over-voltage, over-current and short-circuit protection will trigger if limits are exceeded.
What comes in the box and what must I source separately?
The chassis with the integrated 500 W SMPS is included; you will need to supply your own AC mains cable for the 110 V/240 V input and any DC wiring or connectors for the 5 V, 12 V, 24 V and 36 V outputs.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



