NShi
NShi NH50BAT-4 laptop battery 14.6V 41Wh
Replacement lithium-polymer battery delivering 14.6V and 41Wh for compatible Prostar, Clevo, Gigabyte, Sager and Hasee laptops
- Battery TypeLithium Polymer
- Lithium-polymer cell chemistry delivers reliable power
- 6 V and 41 Wh capacity matches original specs
- Replaces part NH50BAT-4 across multiple laptop series
- CE and UL certified for safety compliance
- Up to 500 recharge cycles over battery life
Replacement battery for Clevo and Gigabyte laptops
The NShi NH50BAT-4 is a 14.6 V lithium-polymer pack rated at 41 Wh. It replaces the original NH50BAT-4 and part number 6-87-NH50S-41C00 in compatible Clevo NH50ED NH50RA NH57RA NH57RC NH70RAQ, Gigabyte A5 X1 A7 X1S, Sager G58R G70R and HASEE Thunderobot 911ME G7-CT7NA G7-CT7NK G8-CT7NT Z7-CT7VH machines.
Black polymer housing with direct-fit connector
The black lithium-polymer casing matches the OEM form factor and plugs into the existing battery bay without adapters. A secure connector ensures the pack is recognised by the system firmware on first installation.
Rated for up to 500 recharge cycles
The cell chemistry supports up to 500 full cycles over the service life. If the new pack is not detected initially, reseat the connector, discharge to 10-20 %, then complete three to four full charge cycles to calibrate the fuel gauge.
Highlights
- Lithium-polymer cell chemistry delivers reliable power
- 6 V and 41 Wh capacity matches original specs
- Replaces part NH50BAT-4 across multiple laptop series
- CE and UL certified for safety compliance
- Up to 500 recharge cycles over battery life
Specifications
| Battery Type | Lithium Polymer |
|---|
Questions about this item
What voltage does the NH50BAT-4 battery deliver, and what runtime ceiling does that set?
The pack supplies 14.6V and stores 41Wh, giving roughly the same runtime as the original pack it replaces.
Which physical connector and form factor does the NH50BAT-4 use so I can confirm it fits my laptop?
It is a direct drop-in for the NH50BAT-4 and 6-87-NH50S-41C00 part numbers used in Clevo NH50ED, NH50RA, NH57RA, NH57RC and NH70RAQ chassis.
What is the correct first-install sequence to avoid the battery not being recognised?
Seat the connector fully, discharge to 10-20%, then complete 3-4 full charge cycles to wake the cells.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



