NShi
NShi Mean Well HRPG-300-3.3 3.3V 60A 198W Server Chassis
A 3.3V 60A 198W server chassis with built-in active PFC, constant current limiting, remote sense and 100% burn-in test
- Chassis TypeDesktop
- Active PFC improves power efficiency
- Constant current limiting protects against overload
- Remote sense maintains accurate 3.3V output
- 100% burn-in test ensures reliability
- 5-year warranty backs long-term use
3.3 V 60 A Power Supply for Server Chassis
This unit is a single-output power supply delivering 3.3 V at up to 60 A for a total of 198 W. It is built into a desktop-type server chassis and includes active power-factor correction. The supply suits integrators who need a compact, forced-air-cooled source for 3.3 V loads in a 1U low-profile enclosure.
Capacity and headroom
Continuous output is rated at 198 W with a built-in constant-current limiting circuit that protects against overload. The fan-cooled design handles full-load operation after a 100 % burn-in test, while no-load consumption stays below 0.5 W. Systems requiring higher power, additional voltage rails or redundant current-sharing beyond the 600 W models listed will exceed what this supply provides.
Active PFC and remote-sense function
The built-in active PFC function shapes the input current across a universal AC range and withstands a 300 VAC surge for five seconds. A remote-sense terminal compensates for voltage drop across the load cables, and a DC-OK signal plus remote on/off control simplify system integration. Buyers needing current-sharing capability should note it is only specified for the 24 V, 36 V and 48 V variants of the 600 W series.
Highlights
- Active PFC improves power efficiency
- Constant current limiting protects against overload
- Remote sense maintains accurate 3.3V output
- 100% burn-in test ensures reliability
- 5-year warranty backs long-term use
Specifications
| Chassis Type | Desktop |
|---|
Questions about this item
Will this chassis accept my existing ATX motherboard and full-height expansion cards?
The chassis type is listed as Desktop, which typically fits standard ATX boards; however, the 1U low profile note on the HRP-300/450 series suggests limited vertical clearance for full-height cards.
How can I verify the power supply is delivering a stable 3.3 V output after installation?
The unit includes a built-in DC OK signal and remote sense function; monitor the DC OK pin or measure the 3.3 V rail at the load point to confirm regulation within spec.
What accessories ship with the unit and what must I source separately?
The package contains the server chassis with the integrated Mean Well HRPG-300-3.3 power supply; mounting rails, power cords and any additional drive cages are not included and must be purchased separately.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



