We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NShi

NShi laptop battery for Microsoft Surface Pro 3 1631 7.6V 42.2Whr 4 cell

SKU CH-QRH3-QJXWD

Replacement 4-cell lithium-ion battery for Microsoft Surface Pro 3 1631, rated 7.6 V, 42.2 Whr and 5547 mAh

  • TypeBattery
  • CompatibilityG3HTA005H, G3HTA009H, MS011301-PLP22T02, Surface Pro 3 1631
  • Battery Type4 Cell Lithium-Ion
  • Battery Voltage7.6V
  • Battery Capacity5547mah
  • Restores mobility with 42.2Whr capacity
  • Matches original 7.6V spec for safe operation
  • Four lithium-ion cells deliver 5547mAh runtime
  • Direct fit for Surface Pro 3 1631
  • Tested for stable current and low self-discharge

Direct replacement for Surface Pro 3 1631

This 4-cell lithium-ion pack is built to match the original Microsoft battery for the Surface Pro 3 model 1631. It delivers 7.6 V and 42.2 Whr from a 5547 mAh cell stack. The unit is intended for owners who need a like-for-like swap without changing chargers or firmware. Buyers with other Surface models or non-Microsoft tablets cannot use this pack.

Fixed 7.6 V output and proprietary connector

The battery communicates with the tablet over the OEM connector so the firmware can report capacity and health accurately. It supplies a single voltage rail and cannot be adapted for devices that expect a different cell count or voltage. Users who plan to run the tablet while charging from a non-OEM dock should verify that dock’s power profile independently.

Adhesive removal is the main difficulty

Replacing the pack requires heating the display adhesive, lifting the screen, and disconnecting the fragile ribbon cable before fitting the new unit and re-sealing with fresh adhesive strips. The most common issue is tearing the display cable or leaving gaps that weaken water resistance. No soldering is involved, but patience and a heat gun or iOpener are essential.

Highlights

  • Restores mobility with 42.2Whr capacity
  • Matches original 7.6V spec for safe operation
  • Four lithium-ion cells deliver 5547mAh runtime
  • Direct fit for Surface Pro 3 1631
  • Tested for stable current and low self-discharge

Specifications

BrandGreenTech
ModelG3HTA005H, G3HTA009H, MS011301-PLP22T02
TypeBattery
CompatibilityG3HTA005H, G3HTA009H, MS011301-PLP22T02, Surface Pro 3 1631
Battery Type4 Cell Lithium-Ion
Battery Voltage7.6V
Battery Capacity5547mah

Questions about this item

Which NShi battery version matches my Surface Pro 3 1631?

The GreenTech G3HTA005H, G3HTA009H and MS011301-PLP22T02 part numbers all identify the same 7.6V 42.2Whr 4-cell lithium-ion pack built for the Surface Pro 3 1631.

What does the 42.2Whr rating deliver in daily use?

At 7.6 volts and 5547mah the pack stores 42.2 watt-hours, giving a full charge cycle that powers the tablet for a typical work session before needing a recharge.

Does the battery use a proprietary connector or a standard interface?

It connects through the Surface Pro 3's internal battery connector, matching the OEM G3HTA005H pin-out so no adapter or cable change is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.