NShi
NShi HLG-240H-42 42V 5.72A 240W LED Switching Power Supply
Delivers 240 W at 42 V with up to 94 % efficiency, IP67/IP65 rating, active PFC and adjustable output for indoor or outdoor LED lighting
- Chassis TypeDesktop
- High efficiency up to 94% reduces energy loss
- Active PFC function improves power factor correction
- IP67 and IP65 ratings suit indoor and outdoor use
- Adjustable output current matches LED load requirements
- 7-year warranty reflects long-term reliability
LED Switching Power Supply
The NShi HLG-240H-42 delivers a constant 42V output at 5.72A with a 240W rating. Built-in active PFC and up to 94% efficiency suit LED lighting and street lighting installations. IP67 and IP65 rated enclosures allow indoor or outdoor mounting. Output current is adjustable via internal potentiometer on A-Type models.
Replaces older non-PFC drivers
This unit supersedes supplies lacking active power factor correction or surge immunity rated to 4kV under IEC61000-4-5. The jump is worth it when installations demand Class I Division 2 hazardous-location compliance or timer dimming functions. Multiple model variants cover adjustable voltage, 3-in-1 dimming and terminal-block wiring needs.
Check your setup before ordering
Verify the AC mains voltage does not exceed 305VAC and that the enclosure type matches the required IP rating. Confirm the load stays within the 240W limit and that wiring method suits the chosen A, B, C or Blank-Type variant. Ensure local regulations accept the 7-year warranty terms for the intended application.
Highlights
- High efficiency up to 94% reduces energy loss
- Active PFC function improves power factor correction
- IP67 and IP65 ratings suit indoor and outdoor use
- Adjustable output current matches LED load requirements
- 7-year warranty reflects long-term reliability
Specifications
| Chassis Type | Desktop |
|---|
Questions about this item
What IP rating does the HLG-240H-42 need for outdoor mounting?
The HLG-240H-42 carries IP67 and IP65 ratings, making it suitable for outdoor installations where water and dust ingress protection are required.
Which wiring step is most often missed when installing the HLG-240H-42?
Connecting the dimming control wires for the 3-in-1 function (1~10VDC, PWM signal, or resistance) is the step most often overlooked during installation.
How often should the HLG-240H-42 be inspected for dust buildup on its convection surfaces?
Inspect the convection-cooled chassis annually and clean any accumulated dust to maintain the 94% efficiency rating and thermal performance over the 7-year design life.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



