We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NShi

NShi Cat6 Plenum CMP 1000ft Black 23AWG 550MHz PoE++ UTP

SKU CH-FEXV-69HSB

Plenum-rated Cat6 bulk cable delivers 550 MHz bandwidth, solid bare copper conductors, and PoE++ up to 90 W for 1 GbE runs to 328 ft and 10 GbE to 165 ft in a 1000 ft easy-pull box

  • Plenum CMP jacket rated for air-handling spaces
  • 23 AWG solid bare copper for stronger signal
  • 550 MHz bandwidth tested for 10 Gbps up to 165 ft
  • Supports PoE++ 4PPoE up to 90 W
  • 1000 ft tangle-free pull box for easy installation

Plenum-rated Cat6 for air-handling spaces

This Cat6 plenum cable is built for installation in air-handling spaces above suspended ceilings or below raised floors. The CMP-rated jacket meets fire-safety requirements for plenum environments. It suits installers and network engineers who need code-compliant horizontal runs in commercial buildings.

Pull-box design eases long runs

The 1000-foot length comes in a tangle-free easy-pull box that reduces snags during installation. Solid 23 AWG bare copper conductors terminate with standard RJ45 connectors and accept keystone jacks without special tools. The main risk is exceeding the 328-foot channel limit for 1 and 5 Gigabit or the 165-foot limit for 10 Gigabit, which degrades performance regardless of cable quality.

550 MHz bandwidth and PoE++ support

The cable is tested to 550 MHz bandwidth and carries PoE++ (4PPoE) up to 90 W per IEEE 802.3bt. This specification decides whether the run can handle 10 Gigabit at the distances above and power high-draw devices such as pan-tilt-zoom cameras or multi-radio access points without a separate power feed.

Highlights

  • Plenum CMP jacket rated for air-handling spaces
  • 23 AWG solid bare copper for stronger signal
  • 550 MHz bandwidth tested for 10 Gbps up to 165 ft
  • Supports PoE++ 4PPoE up to 90 W
  • 1000 ft tangle-free pull box for easy installation

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the cable is performing to the 550 MHz bandwidth rating after installation?

Test the installed run with a qualified cable analyser such as a Fluke DSX-8000 Versiv CableAnalyzer to verify compliance with ANSI/TIA 568.2-D standards.

What comes in the box and which connectors or tools must be purchased separately?

The box contains 1000 ft (305 m) of black plenum-rated UTP cable in an easy-pull package; RJ45 connectors (for example trueCABLE or) and a crimping tool are not included.

Should I choose this 23 AWG solid bare copper version for a 10 Gigabit link of 165 ft with PoE++?

Yes, the 23 AWG solid bare copper construction supports 10 Gbps up to 165 ft and carries PoE++ (4PPoE) up to 90 W per IEEE 802.3bt.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.