We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular power brick with 4.5 by 3.0 mm barrel connector and three-prong AC plug

NShi

NShi 65W 45W AC Adapter 4.5*3.0mm for Dell OptiPlex 5050 5070 5060 D10U D02T D08U D09U Micro Desktop

SKU CH-1BC0-1WWVS

Replacement 65W AC adapter with 4.5mm x 3.0mm connector for Dell OptiPlex Micro desktops

  • Delivers 65W at 19.5V 3.34A for reliable micro-desktop power
  • Also supports 45W 19.5V 2.31A loads across compatible OptiPlex models
  • Works with 100-240V 50-60Hz input for worldwide voltage flexibility
  • 5mm x 3.0mm 3-prong connector matches Dell OptiPlex micro desktop sockets
  • Includes AC adapter and power cord for immediate deployment

65W AC Adapter for Dell OptiPlex Micro

This 65 watt AC adapter replaces the original power supply for a wide range of Dell OptiPlex Micro desktops. It delivers 19.5 volts at 3.34 amps and also supports the 45 watt 19.5 volt 2.31 amp requirement. The connector measures 4.5 by 3.0 millimetres with three prongs. A power cord is included in the package.

Suits owners of listed OptiPlex Micro models

Buyers with a Dell OptiPlex 3020, 3040, 3050, 3060, 3070, 5050, 5060, 5070, 7040, 7050, 7060, 7070, 9010, 9020 or D10U, D02T, D08U, D09U Micro Desktop can use this unit. It is not for users whose device requires a different connector size, voltage or higher wattage. Laptop owners and tower desktop builders should look at something else.

Check your model number

Verify that your OptiPlex Micro appears in the supported list above. Confirm the DC plug on your existing adapter measures 4.5 by 3.0 millimetres with three prongs. Ensure the label on your current unit shows 19.5 volts output. The adapter accepts 100 to 240 volts input at 50 to 60 hertz for worldwide use.

Highlights

  • Delivers 65W at 19.5V 3.34A for reliable micro-desktop power
  • Also supports 45W 19.5V 2.31A loads across compatible OptiPlex models
  • Works with 100-240V 50-60Hz input for worldwide voltage flexibility
  • 5mm x 3.0mm 3-prong connector matches Dell OptiPlex micro desktop sockets
  • Includes AC adapter and power cord for immediate deployment

Specifications

No published specifications for this item yet.

Questions about this item

My OptiPlex 5070 Micro uses a 4.5 mm by 3.0 mm barrel jack — will this adapter plug in directly?

Yes, the connector is 4.5 mm by 3.0 mm and matches the barrel jack on the 5070 Micro and all listed OptiPlex Micro models.

I still run a 9010 Micro and a 7040 Micro — can one adapter power both?

The adapter supplies 19.5 V at up to 3.34 A for 65 W and also covers the 19.5 V 2.31 A 45 W requirement, so it works with both the 9010 and 7040 Micro desktops.

After connecting everything, how can I confirm the adapter is delivering the rated 19.5 V 3.34 A output?

The unit includes built-in overload, over-voltage and short-circuit protection; a steady LED on the adapter brick and normal system boot indicate it is operating within its 65 W rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.