NShi
NShi 30100100 3.7V 6000mAh Li-polymer laptop battery
A 3.7V 6000mAh lithium-polymer rechargeable battery with short-circuit and over-current protection, measuring 100×100×3 mm and weighing 64 g
- Battery TypeLithium Polymer
- 6000 mAh capacity powers devices longer between charges
- Lithium-polymer chemistry delivers stable discharge with no memory effect
- Built-in short-circuit and over-current protection safeguards connected equipment
- Operates reliably from -20 °C to 60 °C for varied environments
- Slim 100 × 100 × 3 mm profile fits tight compartments
Direct replacement cell
The NShi 30100100 is a 3.7 V 6000 mAh lithium-polymer cell built as a direct replacement for compatible laptops, tablets, e-readers and similar portable devices. Its flat 100×100×3 mm form factor fits tight internal bays where cylindrical cells cannot.
Sustained discharge stability
The chemistry delivers a stable discharge rate without memory effect so capacity remains consistent across repeated daily cycles. Built-in short-circuit and over-current protection guards the cell during prolonged loads and the working range of -20° to 60° supports continuous operation in varied environments.
Single-cell voltage limits
As a single 3.7 V pouch the pack tops out at 4.2 V when fully charged and must not be series-connected without external management. Devices expecting higher pack voltages or multi-cell balancing will not operate correctly with this unit alone.
Highlights
- 6000 mAh capacity powers devices longer between charges
- Lithium-polymer chemistry delivers stable discharge with no memory effect
- Built-in short-circuit and over-current protection safeguards connected equipment
- Operates reliably from -20 °C to 60 °C for varied environments
- Slim 100 × 100 × 3 mm profile fits tight compartments
Specifications
| Battery Type | Lithium Polymer |
|---|
Questions about this item
How much heat does the 3.7 V 6000 mAh Li-polymer cell generate during continuous daily charging cycles?
The battery operates safely from -20 °C to 60 °C and includes short-circuit and over-current protection to limit heat buildup during extended use.
What connector or wiring harness must I already have to install the 100 × 100 × 3 mm replacement pack?
The cell ships as a bare 3.7 V 6000 mAh Li-polymer unit without leads; you must reuse the original connector and protection board from the device you are repairing.
Will the 64 g Li-polymer pack fit and balance correctly in a laptop bay designed for a heavier nickel-based battery?
At 64 g and 3 mm thick the pack is lighter and slimmer than most legacy packs, so the original latch and chassis spacing must be checked for secure fit and proper electrical contact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



