NShi
NShi 3.7V 1400mAh Battery for Dolphin 9535 MS9535BT VoyagerBT
3.7 V 1400 mAh lithium-polymer replacement for Dolphin 9535, MS9535 and VoyagerBT scanners, 55.76 × 34.20 × 28.30 mm, 111 g
- Battery TypeLithium Polymer
- Direct replacement for Dolphin 9535, MS9535, VoyagerBT
- 1400 mAh lithium-polymer cell delivers 5.1 Wh runtime
- Compact 55.76 x 34.20 x 28.30 mm fits original bay
- Triple ROSH, CE, UL certification with full protection circuits
- Ready to charge anytime with zero memory effect
Replacement Battery for Dolphin 9535 Series
This lithium-polymer pack replaces the original power cell in Metrologic Dolphin 9535, MS9535, MS9535 VoyagerBT, MS9535BT and Voyager 9535BT handheld scanners. It delivers the same voltage and capacity as the factory unit so the device runs for a full shift without modification. Installers simply swap the old pack and secure the latch.
Voltage and Capacity Match
The cell supplies 3.7V and 1400mAh for 5.1Wh of energy, matching the specifications listed for part numbers 00-06260A, 46-46870, 95359535BT, BJ-9535X-1K1KSM and ML95L1-G. Buyers who need a different voltage or a higher milliampere-hour rating cannot use this pack. Confirm the original part number before ordering.
Steady Output Under Continuous Use
Built-in protection guards against over-charge, over-discharge, over-heat, over-current and short-circuit events during long scanning sessions. The chemistry shows no memory effect, so partial top-ups do not reduce future capacity. The pack maintains stable voltage through repeated charge cycles in warehouse environments.
Highlights
- Direct replacement for Dolphin 9535, MS9535, VoyagerBT
- 1400 mAh lithium-polymer cell delivers 5.1 Wh runtime
- Compact 55.76 x 34.20 x 28.30 mm fits original bay
- Triple ROSH, CE, UL certification with full protection circuits
- Ready to charge anytime with zero memory effect
Specifications
| Battery Type | Lithium Polymer |
|---|
Questions about this item
How long will the 1400mAh capacity run my Dolphin 9535 scanner in daily use?
The 5.1Wh lithium-polymer cell matches the original battery size, so it delivers comparable shift life in the Dolphin 9535, MS9535, MS9535 VoyagerBT, MS9535BT and Voyager 9535BT.
Does the 3.7V output work with the proprietary connector on my VoyagerBT?
Yes, the pack is built to the original 3.7V specification and uses the same connector layout as part numbers 00-06260A, 46-46870, 95359535BT, BJ-9535X-1K1KSM and ML95L1-G.
Will the 55.76 x 34.20 x 28.30mm dimensions fit the battery compartment without modification?
The pack mirrors the OEM footprint at 55.76 by 34.20 by 28.30 millimetres and weighs 111g, so it seats directly in the Dolphin 9535 series without trimming or shims.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



