NShi
NShi 20FB002VGE laptop battery 15.2V 3300mAh
A 15.2 V 3300 mAh lithium-polymer replacement battery for compatible ThinkPad X1 models, with overcharge, overdischarge, overheat, overcurrent and short-circuit protection
- Battery TypeLithium Polymer
- Lithium polymer chemistry delivers stable 15.2 V output
- 3300 mAh capacity provides 50.16 Wh of runtime
- Slim 5.00 mm profile fits X1 chassis precisely
- Triple safety certifications guard against overcharge and short circuits
- Replaces over thirty ThinkPad X1 part numbers directly
Replacement Battery for ThinkPad X1
This lithium-polymer replacement battery fits a wide range of ThinkPad X1 models including the 20FB and 20FC series. It is built for owners who need a direct swap for a worn or failed original pack. The cell chemistry matches the factory specification so the laptop recognises it immediately.
3300 mAh capacity with 50.16 Wh energy
At 3300 mAh and 50.16 Wh the pack delivers the same rated capacity as the original unit, supporting typical office workloads and media playback for a full workday. Runtime will decrease under sustained heavy loads such as video rendering or virtual machines, where the fixed capacity reaches its limit sooner than higher-watt-hour alternatives.
15.2 V nominal voltage
The battery operates at 15.2 V, a value that must match the laptop’s power rail exactly. If the original battery label shows a different voltage the pack will not charge or may trigger a safety shutdown, so verify the voltage before ordering.
Highlights
- Lithium polymer chemistry delivers stable 15.2 V output
- 3300 mAh capacity provides 50.16 Wh of runtime
- Slim 5.00 mm profile fits X1 chassis precisely
- Triple safety certifications guard against overcharge and short circuits
- Replaces over thirty ThinkPad X1 part numbers directly
Specifications
| Battery Type | Lithium Polymer |
|---|
Questions about this item
Will the 15.2 V 3300 mAh battery fit my ThinkPad X1 20FB002RAU without forcing the case?
Yes — it matches the original 305.50 × 109.70 × 5.00 mm footprint and 497 g weight, so the laptop chassis closes normally.
How can I confirm the new pack is charging correctly after installation?
The battery should report 15.2 V and reach 50.16 Wh when full; the OS battery icon will show a steady charge curve and no error codes.
Does the package include the tiny Phillips screws needed to secure the battery, or must I reuse the old ones?
Only the lithium-polymer cell is supplied; you reuse the original screws and any connector brackets from the old pack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



