NShi
NShi 200W 19.5V 10.3A 7.4x5.0mm AC Adapter laptop replacement part
A 200 W 19.5 V 10.3 A AC adapter with a 7.4×5.0 mm barrel plug, compatible with HP EliteBook and ZBook mobile workstations
- Worldwide 100-240V input lets you power the adapter anywhere
- 200W output at 19.5V 10.3A delivers full performance for demanding HP workstations
- 4x5.0mm big black pin connector fits EliteBook 8560w 8740w 8760w ZBook 15 17 G2 and DC7800 DC7900 models
- Built-in OVP OCP SCP protections guard your laptop against voltage current and short-circuit faults
- New condition unit tested and ready for immediate use
200W 19.5V 10.3A AC Adapter
This new NShi adapter delivers 200 watts at 19.5 volts and 10.3 amps through a 7.4mm by 5.0mm barrel connector. It accepts worldwide input voltage from 100 to 240 VAC at 50 or 60 Hz. Built-in protections include over voltage, over current and short circuit safeguards.
For HP mobile workstation owners
Suitable for users replacing the original charger on listed HP DC7800, DC7900, DC8000, EliteBook 8560w, 8570w, 8730w, 8740w, 8760w, 8770w and ZBook 15 or 17 G2 models. Not for laptops that require a different output voltage, a lower wattage rating or a different barrel connector size.
7.4mm x 5.0mm barrel connector
The connector dimensions and centre pin configuration are the single specification that determines physical and electrical compatibility. Verify the original part number against the supported list including 644698-003, 645154-001, 677764-002, HSTNN-CA24, HSTNN-CA16 and A200A00AL before ordering.
Highlights
- Worldwide 100-240V input lets you power the adapter anywhere
- 200W output at 19.5V 10.3A delivers full performance for demanding HP workstations
- 4x5.0mm big black pin connector fits EliteBook 8560w 8740w 8760w ZBook 15 17 G2 and DC7800 DC7900 models
- Built-in OVP OCP SCP protections guard your laptop against voltage current and short-circuit faults
- New condition unit tested and ready for immediate use
Specifications
No published specifications for this item yet.
Questions about this item
What input voltage range does the 200W 19.5V adapter accept?
The adapter accepts a worldwide input voltage of 100-240VAC at 50/60Hz, so it works on mains supplies in most countries without a separate voltage selector.
What is the barrel connector size on the 7.4x5.0mm tip?
The output plug measures 7.4mm outer diameter by 5.0mm inner diameter with a big black centre pin, matching the HP EliteBook and ZBook models listed.
How do you connect the AC adapter to the laptop and mains?
Plug the IEC C5 mains lead into the adapter brick, insert the 7.4x5.0mm barrel into the laptop's power jack until it seats firmly, then switch on the wall socket.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



