NShi
NShi 2.4 GPM Battery Liquid Transfer Pump
Battery-powered pump transfers fuel or water at 2.4 GPM through a 47-inch discharge tube, running on 2 D or 6 AA cells
- TypeCentrifugal & Water Pumps
- MaterialPlastic
- Current TypeDC
- Housing MaterialPlastic
- Impeller MaterialPlastic
- Transfers fuel fast at 2.4 GPM flow rate
- Runs on 2 D or 6 AA batteries for portability
- Pumps over 1000 gallons per battery set
- 47 inch discharge and 16 inch suction tubes reach containers
- Flow control nozzle with filter blocks impurities during transfer
Portable battery fuel pump
The NShi 2.4 GPM pump moves gasoline, diesel, water, light oil or kerosene at up to 2.4 gallons per minute. It runs on two D cells or six AA cells, so no mains power is needed. A 16 inch suction tube fits 3 to 5 gallon cans and jerrycans. Corrosive liquids must not be used.
Thermals noise and power draw
The DC motor draws current only from the installed batteries, producing no mains noise and negligible heat during normal transfer jobs. A single battery set can move over 1000 gallons before replacement. The plastic housing stays cool to the touch even after extended runs.
Flow control nozzle and filter
A built-in flow control nozzle lets the user adjust the rate manually for precise filling. An integrated filter blocks impurities from entering the discharge tube. The battery converter accepts either D or AA cells, giving flexibility when one size is unavailable. The 47 inch discharge tube reaches distant tanks without extensions.
Highlights
- Transfers fuel fast at 2.4 GPM flow rate
- Runs on 2 D or 6 AA batteries for portability
- Pumps over 1000 gallons per battery set
- 47 inch discharge and 16 inch suction tubes reach containers
- Flow control nozzle with filter blocks impurities during transfer
Specifications
| Type | Centrifugal & Water Pumps |
|---|---|
| Material | Plastic |
| Current Type | DC |
| Housing Material | Plastic |
| Impeller Material | Plastic |
| Brand | AstroAI |
| Model | Hand Rivet Nut Setter Kit |
| Part Number | Does Not Apply |
Questions about this item
How do I install the 16 inch suction tube and 47 inch discharge tube on the NShi 2.4 GPM pump, and what step is often missed?
Insert the 16 inch suction tube into the pump inlet and the 47 inch discharge tube onto the outlet until both seat firmly; the step often missed is securing the flow control nozzle onto the discharge end before starting the pump.
What maintenance or replacement will the NShi 2.4 GPM pump need after extended use?
The plastic impeller and filter screen should be inspected periodically and replaced if worn or clogged, and the 2 D cell or 6 AA batteries must be swapped once the 1000 gallon runtime per set is reached.
What limit appears first when running the NShi 2.4 GPM pump continuously?
Battery depletion is the first limit; the pump delivers 2.4 GPM for up to 1000 gallons on one set of batteries before voltage drops and flow falls off.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Unique-Bargains Rear View Camera Cable Adapter Honda Accord 2.4
- for Honda Accord 2.…
Unique-Bargains RJ11 6P4C Female to Dual Female Y Splitter Beige 5pcs
- Divider Connector;T…



