We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NShi

NShi 180W 19.5V 9.23A 7.4mm AC Adapter laptop replacement part

SKU CH-1918-AAZG0

180 W replacement adapter with 19.5 V 9.23 A output and 7.4 mm barrel plug for HP Envy 27 and Omen 35 all-in-one systems

  • 180W output powers demanding all-in-one desktops and curved monitors
  • 5V 9.23A matches original HP 849653-004 specifications exactly
  • 100-240V input works worldwide without a voltage converter
  • 4mm right-angle barrel with centre pin fits Envy 27 and OMEN X 35
  • Over-voltage, over-current, short-circuit and total-power protection built in

Replacement 180W AC Adapter for HP Envy 27

This new NShi power supply matches the original 849653-004 part and delivers 19.5V at 9.23A. It is built for HP Envy 27 All-in-One desktops and the listed Omen X 35 curved displays. The unit accepts 100-240V input for worldwide use.

Right-Angle 7.4mm Barrel Connector with Center Pin

The DC plug uses a 7.4mm right-angle barrel with a centre pin that seats securely in the Envy 27 and Omen X 35 power ports. A US power cord is included so the adapter connects directly to a wall outlet. Over-current, over-voltage, short-circuit and total-power protection circuits guard the connected hardware.

Upgrade from a Failed or Lost OEM 180W Brick

Owners replacing a dead original adapter or a missing charger can restore full power to their all-in-one without changing any other component. The jump is worth it when the existing brick no longer holds voltage or the tip is damaged. Buyers needing a higher-wattage supply for a different chassis should verify their model first.

Highlights

  • 180W output powers demanding all-in-one desktops and curved monitors
  • 5V 9.23A matches original HP 849653-004 specifications exactly
  • 100-240V input works worldwide without a voltage converter
  • 4mm right-angle barrel with centre pin fits Envy 27 and OMEN X 35
  • Over-voltage, over-current, short-circuit and total-power protection built in

Specifications

No published specifications for this item yet.

Questions about this item

Does the 19.5 V 9.23 A output cap at the rated 180 W in practice?

Yes, the adapter delivers up to 180 W at 19.5 V and 9.23 A, matching the stated maximum power.

What physical connector and clearances does the 7.4 mm right-angle barrel with centre pin need to fit?

It requires a 7.4 mm by 5.0 mm barrel jack with a centre pin; the right-angle plug needs side clearance behind the device.

How is this adapter installed, and what step do people often get wrong?

Plug the C13 mains cord into the brick, insert the 7.4 mm barrel fully until the centre pin seats, then connect AC power; the common error is not pushing the barrel in completely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.