NPTCL K1 Wireless Lavalier Microphone USB-C Jet Black
A USB-C wireless lavalier pair with a 24-hour charging case, 70-foot range and noise-reduction chips for two-person recording
- ColorJet Black
- Microphone Sensitivity70 decibels
- Microphone Impedance2200 ohm
- Microphone Signal to Noise Ratio(SNR)64 decibels
- Crystal clear audio from DPS noise-reduction chips and windscreen cover
- 24-hour total runtime with charging case and 6 hours per microphone
- Plug-and-play USB-C connection with automatic pairing no app required
- Dual-microphone kit captures two speakers simultaneously for interviews
- Stable wireless recording up to 70 feet with low latency
Dual-clip USB-C lavalier system
The NPTCL K1 delivers two wireless microphones that connect directly to USB-C devices including iPhone 15, iPhone 16, recent Samsung Galaxy and Google Pixel phones, and USB-C iPad Pro models. Each clip-on unit weighs very little and pairs automatically when the receiver is plugged in, so no app or Bluetooth setup is required. The package includes a charging case that stores both transmitters and extends total recording time to 24 hours. A windscreen on each microphone reduces plosives during close-up speech.
Suited to two-person mobile recording
Content creators who film interviews, vlogs or TikTok clips with a second speaker will benefit from the dual-channel pickup and 70-foot operating range. The system is not compatible with Android 8 or earlier, GoPro cameras, DSLRs, or any device that only offers a 3.5 mm audio jack. Users with Lightning-only iPhones such as the 14, 13, 12 or 11 series need a separate Lightning adapter, which is not included. Buyers who require on-board gain controls or internal recording should consider other solutions.
Steady output during long sessions
Each transmitter runs for six hours on a full charge, and the case recharges them for a combined 24 hours of use before the case itself needs power. The 2200 ohm impedance and 70 dB sensitivity produce a consistent 64 dB signal-to-noise ratio, so background hiss stays low even when the subject moves to the edge of the 70-foot range. Latency remains imperceptible throughout the battery cycle, allowing uninterrupted streaming or recording without the level drops that appear when a single battery nears depletion.
Highlights
- Crystal clear audio from DPS noise-reduction chips and windscreen cover
- 24-hour total runtime with charging case and 6 hours per microphone
- Plug-and-play USB-C connection with automatic pairing no app required
- Dual-microphone kit captures two speakers simultaneously for interviews
- Stable wireless recording up to 70 feet with low latency
Specifications
| Brand | NPTCL |
|---|---|
| Model | wireless lavalier micorphone for iphone |
| Part Number | K1 |
| Color | Jet Black |
| Microphone Sensitivity | 70 decibels |
| Microphone Impedance | 2200 ohm |
| Microphone Signal to Noise Ratio(SNR) | 64 decibels |
Questions about this item
What type of USB-C device must I already own for the NPTCL K1 receiver to plug in and work?
The receiver uses a USB-C connector, so you need a phone, tablet or laptop with a USB-C port — such as iPhone 15 or 16, iPad Pro 10 or later, Samsung Galaxy S22 through S25, or Google Pixel models.
If I keep an iPhone 14 or earlier that only has a Lightning port, can I still use the K1 microphone with it?
The K1 itself is USB-C only; to use it with an iPhone 14, 13, 12 or 11 you must add a separate Lightning-to-USB-C adapter, which the supplier notes as a supported configuration.
After pairing, how can I confirm the K1 microphone is transmitting audio correctly?
The charging case displays a battery-level number for each microphone, and the system provides a 64 dB signal-to-noise ratio with 70 dB sensitivity, so a clear, low-noise recording at up to 70 ft range confirms proper operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



